Dolphin Automotive Rear Brake Light Reversing Camera For Citroen Relay Van 2006 Onwards

[VAN] This OEM Style Rear Reversing Camera Fits The Peugeot Boxer 3rd Generation 2006 Onwards Replacing The Lens Of Your Current High Level Brake Light (It Also Fits The Fiat Ducato & Citroen Relay from 2006 and Vauxhall Movano from 2022 Onwards). Your High Level 3rd Brake Light Should Be Approx 26cm Wide by 5.5cm High Built Into The Rear Roof Of Your Van, Your Van Will Look The Same As The Ones In Our Photos. [DESIGN] The Rear Camera Is Mounted Into The Brake Light To Provide A View Behind Your Van Looking Downwards At The Rear Bumper. The Camera Is Mounted In A Ball & Socket Housing So Can Be Angled As You Require. Its A Complete Replacement Brake Light With An Integrated LED Brake Light. You Just Unplug Your Current Light & Plug This On In Instead. [OPERATION] The Rear Camera Wires To Your Reversing Light Feed So It Comes On When You Select Reverse Gear. You Could Wire It To A 12v Ignition Feed If You Wanted It Always On. It Looks Down Towards Your Bumper. [KIT] In The Kit Includes A 10m RCA / Phono Cable, 1 x Power Lead And The Required Composite Adaptor Cable. The Monitors Come Additionally With Their Own Mounts & Compatible Cabling To Give You A Complete System. If Using With Your Own Monitor Check It Has a Phono/RCA Input Working On A PAL or NTSC Signal. It Is Not AHD Compatible. [SPECIFICATION] The Camera Works On 12v Power With A CMOS Lens At 720p Quality With Dual NTSC & Pal Output. It Has A 170 Degree Viewable Angle With Mirror Image View And Is IP68 Waterproof. It Has 6 LEDs For Infrared Night Vision With A Distance Of 35ft. The Camera Has Reversing Guidelines (These Can Be Deactivated If Not Required).