Dolphin Automotive Rear Brake Light Reversing Camera For Fiat Ducato Van 2006 2021 With 4.3 Inch Dash Board Monitor

[VAN] This OEM Style Rear Reversing Camera Fits The Fiat Ducato 2006 Onwards Replacing Your Current High Level Brake Light (It Also Fits The Peugeot Boxer & Citroen Relay from 2006). Your High Level 3rd Brake Light Should Be Approx 26cm Wide by 5.5cm High Built Into The Rear Roof Of Your Van, Your Van Will Look The Same As The Ones In Our Photos. [DESIGN] The Rear Camera Is Mounted Into The Brake Light To Provide A View Behind Your Van. The Camera Is Mounted In A Ball & Socket Housing So Can Be Angled As You Require. It's A Complete Replacement With An Integrated LED Brake Light. You Just Unplug Your Current Light & Plug This One In Instead. [OPERATION] The Rear Camera Wires To Your Reversing Light Feed So It Comes On When You Select Reverse Gear. You Could Wire It To A 12v Ignition Feed If You Wanted It Always On. It Looks Down Towards Your Bumper. The Monitor Wires To 12v Ignition Live & Stays Off On Standby Until It Gets A Picture Signal. [KIT] The Camera Kit Includes A 10m RCA / Phono Cable, 1 x Power Lead And The Required Composite Adaptor Cable. The 4.3 Dash Monitor Additionally Comes With Its Own Power Lead And An Adjustable Mounting Arm You Can Adhere To The Dashboard Or Windscreen To Give You A Complete System. [SPECIFICATION] The Camera Works On 12v Power With A CMOS Lens At 720p Quality With Dual NTSC & Pal Output. It Has A 120 Degree Viewable Angle With Mirror Image View And Is IP68 Waterproof. It Has 6 LEDs For Infrared Night Vision With A Distance Of 35ft. The Camera Has Reversing Guidelines (These Can Be Deactivated If Not Required).