Dolphin Automotive Rear Brake Light Reversing Camera For Renault Master Van 2010 Onwards - With 4.3" Mirror Monitor

[VAN] This Reversing Camera Fits The 3rd Generation Renault Master 2010 Onwards Replacing The Current Brake Light Built Into The Rear Door. It Also Fits The Opel / Vauxhall Movano 2010-2021 And Nissan NV400 2010-2021 Now Renamed Nissan Interstar 2022 Onwards. Your High Level 3rd Brake Light Should Be Triangular With Approx Dimensions Of 19.3cm Wide By 12.3cm High. Your Van Will Look The Same As The Ones In Our Photos. [DESIGN] The Rear Camera Is Mounted Into The Brake Light To Provide A View Behind Your Van Looking Downwards At The Rear Bumper. This Is A Replacement Brake Light Housing, You Continue To use Your Current Brake Light Wiring & Bulb To Keep Installation Simple & Maintain Your Brake Light Functionality. [OPERATION] The Rear Camera Wires To Your Reversing Light Feed So It Comes On When You Select Reverse Gear. You Could Wire It To A 12v Ignition Feed If You Wanted It Always On, But It Looks Down Towards Your Bumper Remember. [KIT] In The Kit Includes A 10m RCA / Phono Cable, 1 x Power Lead And The Required Composite Adaptor Cable. The Monitors Come Additionally With Their Own Mounts & Compatible Cabling To Give You A Complete System. If Using With Your Own Monitor Check It Has a Phono/RCA Input Working On A PAL or NTSC Signal. It Is Not AHD Compatible. [SPECIFICATION] The Camera Works On 12v Power With A CMOS Lens At 720p Quality With Dual NTSC & Pal Output. It Has A 170 Degree Viewable Angle With Mirror Image View And Is IP68 Waterproof. It Has 6 LEDs For Infrared Night Vision With A Distance Of 35ft. The Camera Has Reversing Guidelines (These Can Be Deactivated If Not Required).