Dolphin Automotive Rear Brake Light Reversing Camera For Vauxhall Vivaro Van 2014 2019

[VAN] This Reversing Camera Fits The Vauxhall Vivaro 2014-2019 Replacing The Current Single Brake (Also Fits The Renaulr Trafic 2014 Onwards, Nissan Primaster 2014 Onwards & Fiat Talento 2016-2020). For The Newer Slimmer Vivaro From 2020 Onwards See Item B098TS6BFR. Your High Level 3rd Brake Light Should Be Approx 23.5cm Wide by 8cm High Built Into The Rear Door Of Your Van. Your Van Will Look The Same As The Ones In Our Photos. [DESIGN] The Rear Camera Is Mounted Into The Brake Light To Provide A View Behind Your Van Looking Downwards At The Rear Bumper. The Camera Is Mounted In A Ball & Socket Housing So Can Be Angled As You Require. This Is A Complete Replacement Brake Light Housing. You Just Unplug Your Current Light, Plug This One In And Swap Your Bulbs Over. [OPERATION] The Rear Camera Wires To Your Reversing Light Feed So It Comes On When You Select Reverse Gear. You Could Wire It To A 12v Ignition Feed If You Wanted It Always On. It Looks Down Towards Your Bumper. [KIT] In The Kit Includes A 10m RCA / Phono Cable, 1 x Power Lead And The Required Composite Adaptor Cable. The Monitors Come Additionally With Their Own Mounts & Compatible Cabling To Give You A Complete System. If Using With Your Own Monitor Check It Has a Phono/RCA Input Working On A PAL or NTSC Signal. It Is Not AHD Compatible. [SPECIFICATION] The Camera Works On 12v Power With A CMOS Lens At 720p Quality With Dual NTSC & Pal Output. It Has A 170 Degree Viewable Angle With Mirror Image View And Is IP68 Waterproof. It Has 6 LEDs For Infrared Night Vision With A Distance Of 35ft. The Camera Has Reversing Guidelines (These Can Be Deactivated If Not Required).