Dolphin Automotive Reverse Rear Parking Sensor Kit With Buzzer (Gloss Black)

Parking Sensor Kit With 4 Sensors In Your Colour Choice From A Range Of Colours. Paint Colour Is Baked On In Factory Rather Than Retro Sprayed For A Lasting Finish. If You Want To Spray Your Own Colour Then Order Matt Black. You Will Get Audio Alerts From Over 1m to 30cm Starting With Slow Beeps To Continuous Tone At 30cm. The Buzzer Has High / Low & Off Setting, If For Example You Have Sleeping Children In The Car, Have Temporarily Fitted A Bike Rack Or Towing A Trailer Which The Sensors Are Seeing. Parking Sensors Connect To The Reversing Light For Power And So They Come On Automatically When You Select Reverse Gear. The Sensors Fit A 21mm Hole (Cutter Supplied) With a 25mm Outer Face To Leave A 2mm Overlap For A Neat Finish To Cover Where You Have Drilled The Holes In The Bumper. Please Check You Are Confident To Fit These Or Have An Installer Lined Up Before Purchasing. There Is A Waterproof Swap Socket On The Parking Sensor Cables 6 Inches From The Head For Ease Of Fitting & Replacement If Required. The Brain Box Has An Adjustable Sensitivity Control. This Is Tuned In The Factory For Optimum Use But Can Be Adjusted If Required. The Reversing Sensor Kit Includes a 21mm Hole Cutter, 1m Power Cable To Connect To Reverse Light, Brain Box, Dash Display On A 6m Lead (With Inbuilt Buzzer), 4 Sensors On 2.5m Cables & English Instruction Manual. Extension Leads Available For Sensors, Display Or Power Lead If you Have An Oversized Vehicle.