Double Door Infra Red Sensor, 12 24v DC

ONE SENSOR FOR BOTH DOORS. This infrared sensor watches both doors of a double cabinet. Open either door and the cabinet light comes on, and it goes off once the doors close. The soft start brings the light up gently, with no harsh snap. FOR 12V AND 24V DC LED LIGHTS. Use it with our 12V or 24V DC LED cabinet lighting and a non-dimmable LED driver. The maximum load is 30W at 12V DC or 60W at 24V DC, so add up the wattage of the lights you connect before fitting it. SURFACE MOUNT, PLUG IN. Fix the sensor to the cabinet surface between the two doors and connect it between the driver and one light on its 800mm cable. To run up to 6 lights from it, add our 6-way distributor, sold separately. FOR KITCHENS, WARDROBES AND DISPLAYS. Fit it in double kitchen wall units, larder cupboards, wardrobes, sideboards and display cabinets, so the light comes on as you reach in. Only 8.8mm thin, so it stays out of sight. IP20, for indoors. 3-YEAR WARRANTY, LOW PROFILE. The slim sensor measures 41.8 x 28.8 x 8.8mm and sits neatly behind a face frame or under a shelf. Soft start operation is easy on your lights. Warranty: 3 Years, with Simple Lighting UK customer support.

Our double door, infra-red door sensor allows your cabinet lights to automatically switch on when the door is opened and off once the door is closed. It features a soft start and it is suitable with all of our 12v to 24v DC LED lighting products. Out of the box, you can plug one light into this sensor, if you desire to plug more lights in then we recommend that you buy our 6-way distributor (Which allows for a maximum 6 lights) - Product code SY7637. Note: This sensor is only compatible with non-dimmable LED drivers. Key Features: Cable Length - 800mm Max Wattage - 30w (12v) 60w (24v) Surface Mountable Dimensions: 41.8mm * 8.8mm * 28.6mm