Draper Bandsaw, 305mm, 750W

Zoro Tools

This two-speed bandsaw is designed to cut wood, wood-derived materials and plastics. Built to a high specification and ideal for trade professionals. This is reflected in the quality of the structure and strength of the worktable support and tilt mechanism, as well as the structure and strength of the blade wheel adjusting mechanism. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. There is a tool drawer built into the base unit providing convenient storage while working. Supplied with 4tpi blade, parallel rip fence and other accessories. This bandsaw can be floor standing or mounted on a stand available separately (Stock No. 84718).|1 x 4tpi blade 1 x Parallel rip fence1 x Open ended spanner1 x Push stick4 x Hex keys4 x Pan head screw, M7 x 12mm 4 x Washers, 8.5mm4 x Plastic wing bolts|Voltage: 230VFrequency: 50HzInput: 750WNo load speed: 1400rpmMaximum throat capacity: 305mmCutting depth: 165mm Maximum capacity: 172mmCutting speed: 2 speed, 6.16m/sec (370m/min) and 13.33m/sec (800m/min)Table size: 390 x 480mm (Tilt to 45 degrees)Bandsaw dimensions: 750 x 520 x 1170mmWeight: 57kg|No-volt switch

Electrical World

This two-speed bandsaw is designed to cut wood, wood-derived materials and plastics. Built to a high specification and ideal for trade professionals. This is reflected in the quality of the structure and strength of the worktable support and tilt mechanism, as well as the structure and strength of the blade wheel adjusting mechanism. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. There is a tool drawer built into the base unit providing convenient storage while working. Supplied with 4tpi blade, parallel rip fence and other accessories. This bandsaw can be floor standing or mounted on a stand available separately (Stock No. 84718).

ManoMano

Designed for workshop use a bandsaw with excellent performance and cutting capacity Attached with a fine ground table that tilts between 0-45° Fitted with LED flexi-light, micro switches, dust collection tray, quick release blade tensioner and blade bearing guides Can be bench mounted or fitted to a stand (available separately) Supplied with mitre gauge, rip fence and dust extraction outlet and fitted with a cable and approved plug Display packed This is a Draper product.