Draper Bandsaw, 340mm, 1100W

Zoro Tools

This two-speed bandsaw is designed to cut wood, wood-derived materials and plastics. Built to a high specification and ideal for trade professionals. This is reflected in the quality of the structure and strength of the worktable support and tilt mechanism, as well as the structure and strength of the blade wheel adjusting mechanism. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. There is a tool drawer built into the base unit providing convenient storage while working. Supplied with 4tpi blade, parallel rip fence and other accessories. This bandsaw can be floor standing or mounted on a stand available separately (Stock No. 99270).|Voltage: 230VFrequency: 50HzInput: 1100WNo load speed: 1400rpmMaximum throat capacity: 340mmCutting depth: 225mm Maximum capacity: 205mmCutting speed: 2 speed, 6.16m/sec (370m/min) and 13.33m/sec (800m/min)Table size: 545 x 515mm (Tilt to 45 degrees)Bandsaw dimensions: 850 x 650 x 1297mmWeight: 74kg|No-volt switch

Electrical World

This two-speed bandsaw is designed to cut wood, wood-derived materials and plastics. Built to a high specification and ideal for trade professionals. This is reflected in the quality of the structure and strength of the worktable support and tilt mechanism, as well as the structure and strength of the blade wheel adjusting mechanism. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. There is a tool drawer built into the base unit providing convenient storage while working. Supplied with 4tpi blade, parallel rip fence and other accessories. This bandsaw can be floor standing or mounted on a stand available separately (Stock No. 99270).

ManoMano

Designed for workshop use, a bandsaw with excellent performance and cutting capacity Capable of straight and cross cutting, ripping, mitre and the 0-45° tilting table enables bevel cutting Fitted with an LED lamp, mitre guide, rip fence and a finely ground cast steel table Supplied with 1/2 inch 4TPI blade, a push stick, open ended 8 x 10mm spanner and 3, 4, 5 and 6mm hex keys Can be bench mounted or fitted to a stand (Stock No: 84719, available separately) Fitted with a dust extraction outlet and cable with approved plug This is a Draper product.