Draper Metal Cutting Disc - 115 x 2.5 x 22.23mm

This flat cutting disc is designed for fast, precise straight cuts on metals such as steel, structural steel, and sheet metal. It is made from premium aluminium oxide, resin-bonded and reinforced with fibreglass to enhance strength and performance. The bore features a stainless-steel ring for safe mounting onto compatible angle grinders. The disc is suitable for 115mm grinders with a 22.23mm bore and is manufactured to EN12413 standards. Key specifications include a diameter of 115mm, thickness of 2.5mm, bore size of 22.23mm, a maximum speed of 13,300 rpm, and an approximate weight of 0.058 kg.

Features

• Fast straight cuts on steel, structural steel, and sheet metal
• Premium aluminium oxide, resin-bonded with fibreglass reinforcement
• Stainless-steel bore ring for safe mounting
• Compatible with 115mm angle grinders (22.23mm bore)
• Manufactured to EN12413 standards

Technical specifications

• Diameter: 115mm
• Thickness: 2.5mm
• Bore size: 22.23mm
• Maximum speed: 13,300 rpm
• Weight: ~0.058 kg
• Material: aluminium oxide, resin-bonded, fibreglass reinforced

Usage and installation

Unplug the grinder before installation. Mount the disc securely onto the grinder’s spindle using the stainless-steel ring, ensure proper alignment, and tighten before use. Use the disc for fast, straight cuts on metal surfaces at or below the maximum speed.

Unplug the grinder before installation. Mount securely onto the spindle, ensure proper alignment, and tighten before use.