Draper Mortar Raking Diamond Blade 99796 115mm

This hardened and tempered diamond blade features a segmented rim designed to cut efficiently, particularly for removing mortar joints quickly and precisely without damaging brick, block, or masonry surfaces. Suitable for both dry and wet cutting, it performs best when used with water. The blade measures 115 mm in diameter with a 22.23 mm bore, and includes an 8 mm segment height and 6.4 mm kerf. It is compatible with most angle grinders that have a 22.23 mm bore and is designed for high-speed operation up to 13,300 rpm. Built to provide fast, clean cuts, it is a practical tool for masonry work where mortar removal is required while preserving surrounding material.

Features

• Hardened and tempered diamond blade with segmented rim
• Max speed 13,300 rpm for fast cutting
• 115 mm diameter, 22.23 mm bore
• 8 mm segment height, 6.4 mm kerf
• Removes mortar joints without damaging masonry
• Wet or dry cutting, best when used wet

Usage and installation

Ensure the grinder is turned off and unplugged before installation. Attach the blade securely to the grinder’s arbor, ensuring it is properly aligned and tightened. The blade is compatible with most angle grinders featuring a 22.23 mm bore. For best results, use water during cutting to reduce dust and heat, operate at the maximum recommended speed of 13,300 rpm, and apply steady, even pressure for a clean, precise cut.

Always ensure the grinder is turned off and unplugged before installation. Use water during cutting to reduce dust and heat. Operate at the maximum recommended speed of 13,300 rpm and apply steady, even pressure for a clean, precise cut.