Dremel MAX Sanding Drum (408DM) Carbide Coated 12.7mm for and Drilling with Life Durability Long Lasting Performance Your Rotary Tool. Hole Drill.

Dremel Max 13 Mm 408d Multitools Sanding Band. Tackle tough jobs with the DREMEL MAX 13 mm 408D Sanding Band & Hole Drill. This versatile accessory boasts a carbide coating for 30x longer life and exceptional durability, outlasting standard sanding bands. Effortlessly sand wood, composites, fiberglass, and more, or plunge cut into soft wood and ceramic wall tile. Mounted on a robust steel mandrel, it allows for precise surface smoothing, hole enlargement, and cavity creation. For optimal results, start at lower speeds, let the tool work with minimal pressure, and always refer to recommended RPMs for drilling. Avoid metal and finishes to prevent clogging. Sanding hard & soft woods, composites, fiberglass, Masonite boards, rigid foam, and more. Drilling soft wood and ceramic wall tile. Mounted on an extra strong, steel mandrel the sanding drum allows you to move laterally or orbitally to smooth out surfaces, enlarge holes, or create irregular cavities. Drum is most effective when the edge is flat against the work piece. To find optimal speed, start slowly and gradually increase speed in order to avoid excessive heat. Let the tool do the work with reduced speed and apply little to no pressure in order to maximize accessory life. Not recommended for usage with metal or substances such as paint & other finishes as drum will be clogged easily. This accessory functions as both a sanding drum and a hole drill. With hole drill function you can plunge cut into a variety of materials. Start drilling by holding your tool on a 45 degree angle. Continue cutting, moving the tool in circular motion. Allow the tool to cut the whole gradually. This way you will build minimum heat around the accessory and maximize the accessory life. When drilling holes through ceramic wall tile, start hole on the non-glazed side of the tile. To remove a material plug stuck in the hole saw, fasten a screw into the plug and pull it out or lightly tap the plug with a punch until it breaks.Features:- 30 times longer life compared to standard Dremel sanding band (408).- Carbide coating provides added durability to the surface of the drum and will not tear loose like other ordinary sanding bands.- Functions as both a sanding drum and a hole drill capable of plunge cutting into a variety of materials.- Mounted on an extra strong steel mandrel.Specifications:- Shank diameter: 3,2 mm- Working diameter: 13,0 mm- Working height: 13,0 mm- Working length: 13,0 mm- Grit: 60- Maximum RPM: 35.000 1/minMaterials to use on: - Ideal for soft woods and ceramic wall tile.- Not recommended for stone, porcelain, or hard floor tiles.Hole drill - Recommended speed:- Soft & Hard Wood 20000 RPM- Laminates/Plastics 15000 RPM- Ceramic 15000 – 20000 RPMTechnical details for Sanding band and hole drill DREMEL® MAX:- Plywood- Softwood- Chipboard- Hardwood- Soft Metal- Brass- Hardened Steel- Gold- Aluminium- Silver- Stainless Steel- Copper- Rubber- Plastic- Plexiglass. tradeinn Bricoinn

High-Quality Coating: The Dremel MAX 408DM Sanding Band and Hole Drill has carbide coating which provides extra durability to the surface of the drum and will not tear loose like other ordinary sanding bands. 2-in-1 Accessory: Functions as both a Sanding Drum and Hole Saw capable of plunge cutting into a variety of materials; the drum is attached to the shank itself 30x Longer Life: 30x NO changing of sanding band (compared with Dremel standard sanding brand 408), less space needed to store your sanding bands and 30x less need to buy new sanding bands Multimaterial Accessory: Ideal for a variety of materials including ceramic wall tile, hard & soft woods, composites, fiberglass, masonite boards, rigid foam, gourds and more Versatile Use: The accessory is mounted on an extra strong, steel mandrel the sanding drum allows users to move in almost all directions: laterally or orbitally to smooth out surfaces, enlarge holes, or create irregular cavities