£ 16.49
DSD TECH SH-C31B USB to CAN Bus FD adapter, slcan Serial Port, 5 Mbit/s Serial-port driver-free on Windows, SocketCAN Linux, fuse and TVS protected, 120 Ohm switch,
Prices from
16.49
Sponsored links
|
|
£ 16.49 |
To Shop
|
| COMPARE ALL WEBSHOPS (1) | ||
Description
Amazon
It Is Just a COM Port: SH-C31B ships with ElmueSoft's slcan 2.5 firmware already installed, so Windows enumerates it as a standard USB serial device — no WinUSB, no Zadig, no driver package. If your software wants a serial port, this is the board that gives it one. On Linux it attaches to SocketCAN through slcand, or you can drive it directly with anything that speaks slcan. CAN FD at 5 Mbit/s, Measured on This Hardware: Data rates from 500 kbit/s to 5 Mbit/s were run against a real CAN FD bus with 64-byte frames. At 2 Mbit/s and at 5 Mbit/s: 50 frames each direction, byte-for-byte correct, zero error frames. BRS is carried when you ask for it. 5 Mbit/s is the transceiver's rated ceiling and we do not claim past it. Based on CANable 2.0, Hardened for the Field: An enclosure instead of a bare board, and protection the reference design leaves out — a resettable fuse in series with CAN_H and with CAN_L, and TVS clamping on both. A 120 ohm termination switch is built in, and the bus lands on a 3.81 mm screw terminal rather than a header. Open Source Hardware, Actually Published: We do not only build on open hardware — we publish our own design back. The full schematic and PCB layout for this board are on our GitHub (dsdtech-official) as editable design files, not pictures, under the CERN-OHL-S-2.0 licence. Every claim above is in that schematic. Go and check it. About DSD TECH: Established in 2009, DSD TECH specializes in industrial connectivity solutions, delivering 80+ products (USB/RS232/UART/RS485/CAN) to 100,000+ global clients across automation and communication sectors. Every device comes with lifetime support and 1 year product replacement service.
Compare webshops (1)
Sponsored links · Some shops pay us a fee
Sort by:
Shops with other sizes
Description
(1)
It Is Just a COM Port: SH-C31B ships with ElmueSoft's slcan 2.5 firmware already installed, so Windows enumerates it as a standard USB serial device — no WinUSB, no Zadig, no driver package. If your software wants a serial port, this is the board that gives it one. On Linux it attaches to SocketCAN through slcand, or you can drive it directly with anything that speaks slcan. CAN FD at 5 Mbit/s, Measured on This Hardware: Data rates from 500 kbit/s to 5 Mbit/s were run against a real CAN FD bus with 64-byte frames. At 2 Mbit/s and at 5 Mbit/s: 50 frames each direction, byte-for-byte correct, zero error frames. BRS is carried when you ask for it. 5 Mbit/s is the transceiver's rated ceiling and we do not claim past it. Based on CANable 2.0, Hardened for the Field: An enclosure instead of a bare board, and protection the reference design leaves out — a resettable fuse in series with CAN_H and with CAN_L, and TVS clamping on both. A 120 ohm termination switch is built in, and the bus lands on a 3.81 mm screw terminal rather than a header. Open Source Hardware, Actually Published: We do not only build on open hardware — we publish our own design back. The full schematic and PCB layout for this board are on our GitHub (dsdtech-official) as editable design files, not pictures, under the CERN-OHL-S-2.0 licence. Every claim above is in that schematic. Go and check it. About DSD TECH: Established in 2009, DSD TECH specializes in industrial connectivity solutions, delivering 80+ products (USB/RS232/UART/RS485/CAN) to 100,000+ global clients across automation and communication sectors. Every device comes with lifetime support and 1 year product replacement service.
Product specifications
Related results
Featured Choice
£ 16.49
