E14 Thermoplastic Lamp Holder Partially Threaded with White Ferrule

COMPONENTS OF THE LAMP HOLDER: Each lamp holder consists of 4 pieces: a cap with M10x1 female thread for fixing, a connection clamp with screws to connect the cables, an externally threaded sleeve with stop and a ferrule to screw on the sleeve and fix a lampshade. CONNECTION CLAMP: Designed for rigid or flexible cables from 0.5 to 1 mm² section. Provides a secure connection with an electrical voltage of 250V and 2A. VERSATILITY OF FITTING: The M10x1 thread of the cap facilitates direct mounting on threaded pipes in ceiling or table lighting fixtures. It can also be used for pendants, mounting directly onto the cable with a cable gland and M10x1 male thread. Supports a maximum weight of 1kg! SAFETY GUARANTEED: Both the sheath and the internal disc are equipped with a safety lock system. This intelligent mechanism prevents accidental unscrewing together with the bulb, avoiding the exposure of electrical contacts. If you need to unlock, it's simple: just insert a screwdriver inside and press the lock tab of the connection disc while unscrewing the sleeve from the cap. For your safety, it is essential to disconnect these products from the mains before manipulating them. If in doubt, please contact a certified electrician., Manufacturer: Velamp