easysac FixSac 2 Storage Net for Fixing without Drilling Commercial Vehicles, Camper Vans, Motorhomes, Caravans and Boats 35 x 30 cm

This is the second version of the FixSac Storage Net, created and marketed by our company in early 2019. The success of the first version generated numerous comments and suggestions from our customers. This allowed us to improve the product by adding several enhancements. An innovative, drill-free fixing method for almost any surface using only a screwdriver. Thanks to the four integrated EasyFix nut stickers, supplied with M4 x 12mm screws, FixSac can be installed on: sheet metal, glass, plastic, polyester, tiles, melamine, plywood, and lacquered or painted wood. FixSac is already available in two sizes: 45 x 40cm and 35 x 30cm. These are the maximum recommended dimensions between the fixing points, once the nets are attached to the hooks. Each net also comes with four wood screws. If you don't want to use the adhesive option, you can still screw the product into a wooden or other surface. Installation tip: The surface must be clean, dust-free, and grease-free. Use the appropriate cleaning product. If you want to apply the product to sheet metal (e.g., a commercial vehicle), we recommend using acetone. Remove the protective films and stick the EasyFix stickers in the desired location according to the mesh size. Press firmly in the center to ensure the central part adheres. Push any air bubbles towards the edges. It is best to wait at least 12 hours before screwing in the studs and hanging the Fixsac. Note that this fixing method IS NOT SUITABLE FOR PAINTED WALLS… the adhesive on the stickers is too strong and may chip the paint!