eco3spa Step 1 Cold Tub & Ice Bath Surface Plumbing Cleaner

For cold tubs without a water circulation system use eco 3 spa Step 1 Cold Tub Cleaner at each water change. Empty the water and wipe all tub surfaces with a small amount cleaner on a soft, clean cloth. Thoroughly rinse any cleaner residue away before the tub is refilled. As the water drains down wipe away any visible residue left on the shell of the tub and rinse the surfaces with fresh water. Wipe away any stubborn scum marks by using a very small amount of the cleaner on a soft, clean cloth. For cold tubs with a water circulation system Uue eco3spa Step 1 Cold Tub Cleaner before each water change. Ensure the tub is full of water to 50mm above all water inlets and outlets and remove the filter from its housing (if fitted). Tip 100ml of Cold Tub Cleaner into the water for every 300litres of water in your cold tub. Turn on the circulation for at least 60 minutes. It is normal for foaming to occur and dark coloured particulates to be seen. Drain the cold tub and clean all surfaces as above. Non-toxic and environmentally friendly. The drained water is safe to empty onto grass or plants.