ElecGear 4x Replacement Joystick (EL6 ALPS 2.1K) for PS5 / PS4 Wireless Controller, Analog Stick Controller Sensor Assembly Thumbstick Module work with DualSense and DualShock 4

[EL6 ALPS 2.1K for PS5 and PS4] – 4x replacement analog joystick work with PlayStation 5 DualSense and some PS4 DualShock 4 wireless controllers. The thumbstick module was made by ALPS. This RKJXV stick controller series comes with 2.1KΩ trimmer potentiometers [Compatibility] – We’re listing two ALPS models for PS4 and PS5. The difference is the resistance value of the potentiometers. You can distinguish them from the color of the side plastic. EL1 is 10KΩ in gray, while EL6 is 2.1KΩ in black or green. PS5 controller uses two kinds of joysticks from two different manufacturers. EL6 was made by ALPS, while EL7 was from Favor Union (FU). They’re interchangeable with each other [Additional Resistor] – Complicated moving mechanism and daily wear and tear finally caused drifting. Even new sensors cannot be 100% balanced. Calibrating in controller settings might not work. We packed 10x correction resistors to solve the potential problem in hardware level. Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. It will help correct 3 to 5 degrees drifting [When to replace] – The analog joystick needs to be replaced when your controller has the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no reaction when clicking, or it wouldn't center after years of wear and tear. The OEM genuine repair parts ensure accuracy and prolong lifespan [Reminder of Operation] – With as many as 14 prongs, de-soldering and soldering the whole module takes serious skills. Professional repair with a heat gun is suggested. You can simply replace the side potentiometer sensor alone to solve most of the joystick problems, Platforms: PlayStation 4