Elegoo Pla 1.75 Mm 1kg Filament

Elegoo Pla 1.75 Mm 1kg Pla Filament Golden . Elevate your 3D printing with ELEGOO Star Gray PLA+ filament. This 1kg spool offers enhanced durability, cracking resistance, and superior layer adhesion compared to standard PLA, while maintaining ease of printing. Its consistent 1.75mm diameter and ±0.02mm precision ensure smooth feeding and minimal blockages. The neutral, matte finish enhances detail visibility, perfect for both technical and decorative projects. Uniformly wound and vacuum-sealed with a desiccant, it´s ready to print out-of-the-box. Compatible with most FDM printers, it provides clean, deformation-free results with excellent heat conduction. Enjoy precision and convenience for all your creations. EU Plug.ELEGOO filament in blue is a good choice if you want a light, clean shade that looks good on larger surfaces and in details.The material has a uniform color and smooth texture, so prints look aesthetically pleasing and are well reproduced.It is based on PLA+ (polylactide plus - a biodegradable material of plant origin, enriched with additives to increase durability).The spool contains 1 kg of filament.Features:Durability and precision:- With increased resistance to breakage and better layer consistency, PLA+ is more durable than standard PLA, yet just as easy to print.A consistent diameter of 1.75 mm and dimensional precision of ± 0.02 mm guarantee smooth material feeding and less risk of blockages.Smooth surface and good heat conduction make even more complex models come out cleanly and without deformation.Convenience and compatibility:- The material is wound evenly and checked by hand, reducing the risk of tangles.The whole thing is vacuum-packed with a moisture absorber, so once opened you can start printing right away.The product fits most FDM (Fused Deposition Modeling - a 3D printing technology in which material is melted and applied in layers) printers that support 1.75mm filament.Specifications:General:- Weight:1 kg Recommended print settings:- Drying settings before printing:55 ± 5°C - Ambient temperature and humidity:≤ 50°C, ≤ 20% relative humidity (store with moisture absorber) - Nozzle temperature:200 - 230°C - Table temperature (depending on printer and surface):35 - 65°C - Type of working surface:Textured PEI (polyetherimide - a durable material that holds prints well) or other compatible plates - Printing speed:Less than 280 mm/sec Physical properties:- Density:1.30 g/cm - Melting point:161°C - Deflection temperature under load:56°C - Softening temperature (Vicat test):63°C Mechanical properties:- Tensile strength (XY - measurement made in the horizontal plane of the print, where the material is strongest):38 ± 2 MPa - Elongation at break (XY):7,9% ± 1,6% - Bending strength (XY):74 ± 4 MPa - Bending modulus (XY):2979 ± 156 MPa - Impact strength (XY):65.5 ± 3.6 kJ/m . tradeinn Techinn