Engine Cylinder Hone Tool 3 Jaws Honing Flexible Shaft Carbon Removing for Car 2 6.7in Range

Fitment ---- Engine Cylinder Hone Tool is suitable for degreasing of engine cylinders with diameters of 3/4 in to 2‑1/2 in and 1‑1/4 in to 3‑1/2 in. Manufacturer Part Number: 88233. Range: Approx. 50-170mm/2-6.7in. Usage ---- Step 1. Spray lubricant on the stones or the cylinder bores. Get the hone set up on the drill. Step 2. Insert the engine hone into the cylinder and run the drill at low speed between 300-700 RPM. Move the hone up and down around once a second. Don't push or pull the stones more than 3/4 inches out of the cylinder. Don't run the engine hone for more than 3 mins. Step 3. After honing, use a paper towel to wipe out the inside of cylinder. Automatic centering ---- Flexible shaft, easy to use and automatic centering. The knurling wheel can adjust the spring pressure of the stone on the cylinder hole. Remove carbon deposits and hot glazes from cylinder holes. Ideal for removing rust deposits from older re‑ builds. Ergonomic design ---- Engine Cylinder Hone have ergonomic design, which is easy to operate, labor-saving, high work efficiency, bring much convenience for you. Decent construction robust enough for small cylinders. Easy to use and did the job without any issues. Great piece of kit does the job well. High-quality material ---- Engine Cylinder Grinding Brake Hone Shaft Tool is made of high quality material and special technology, enhance their stability and performance, ensure excellent durability and long service life. Every product must take inspected and tested multiple times before the shipment.