ENGO ECB5-230 Underfloor Heating Wiring Centre 5 Zone 230V Control Box Takes mains or battery thermostats, 6 actuators per channel, volt-free boiler relay pump output, DIN rail wall fit

Works with your thermostats: Takes 230 V thermostats with a relay or a switched live output, and battery thermostats with volt-free contacts, as shown on the wiring guide inside the lid Check before you buy: Made for water underfloor heating with 230 V normally closed actuators and wired thermostats, it is not for 24 V systems or electric heating mats, and has five zones What you get: One ECB5-230 control box with its 10 A fuse and a quick guide, with thermostats, actuators and cable bought separately, such as ENGO E30NC-230 actuators Wall or DIN rail fitting: Compact 150 x 90 x 35 mm housing with a DIN rail clip on the back and labelled screw terminals, sized for smaller manifold cabinets and fitted by a qualified electrician Boiler or pump on demand: The volt-free COM/NO output fires the boiler when any zone calls for heat, or add a link for a 230 V pump up to 16(1) A, after a 3 minute start delay that protects the system Five zones, six actuators each: Every zone drives up to six 230 V actuators of 2 W, with a green light per zone plus power and output lights on the lid, 230 V AC 50 Hz supply, IP20