EPEVER MPPT Solar Charge Controller 30A 12V/24V Auto Work Max. PV 100V Common Negative input Power 390W/780W with LCD Display for Gel AGM Sealed Flooded Lithium Battery (Tracer3210AN)

EPEVER MPPT solar charge controller, 30A 12V/24V auto work, Max PV 100V, Max solar panel input power: 390W charge for 12V battery / 780W charge for 24V battery .Common negative ground design. Battery type: Lead-acid, Lithium and User-defined .( Sealed /GEL(AGM)/Flooded; LiFePO4/ Li[NiCoMn]O2 ; User ), (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type ). Remote temperature cable for the sensor (model: RTS300R47K3.81A), used to collect the temperature of the battery, to perform temperature compensation of the control parameters and to protect the battery. The standard length of the cable is 3 meters. The battery temperature compensation function ensures the service life of the controller. It protects the battery from overcharging of the solar module and overdischarging of the load. Solar Panel Regulator advanced MPPT technology, with tracking efficiency no less than 99.5% and peak conversion efficiency of 98%. Ultra-fast tracking speed. 3-Stage charge . With upgrade LCD displays system information intuitively. Fully programmable function via remote meter, PC software and Mobile APP. MPPT Solar Charge Controller is equipped with a standard MODBUS open architecture RS485 port. High quality and low failure rate due to ST and IR components. Compatible with lead-acid and lithium-ion batteries, with battery temperature compensation function (lead-acid batteries only), real-time energy statistics, overheating power reduction function.