eSun ePLA LW filament 1.75mm Black 1 kg

Esun Pla-lw 1.75 Mm 1kg Filament. EU Plug.eSUN PLA-LW is a lightweight PLA filament designed specifically for applications that require low weight and high strength, such as RC planes, drones, and cosplay props.With an advanced foaming technology that expands the material up to 220%, it allows for efficient material usage while maintaining durability and ease of use.Features:- Designed for RC planes and lightweight applications.- Low density with high foaming volume ratio.- Foaming rate of up to 220%.- Strong and easy to repair.- No clogging, no warping, and minimal tangling.- Easy to paint with a smooth matte finish Lightweight Material with High Expansion:- The active foaming technology in ePLA-LW significantly reduces material density while maintaining structural integrity.With a maximum foaming ratio of 220%, a single roll of ePLA-LW is equivalent to 2.2 rolls of standard PLA.The material´s density is only 0.54g/cm³, making it ideal for lightweight applications like model airplanes and drones.Smooth & Reliable Printing Experience:- This filament is designed for smooth and trouble-free printing.It undergoes strict mechanical winding and manual inspection to ensure tangle-free operation.The filament feeds consistently without clogging the nozzle or extruder, reducing the risk of breakage or warping.It also has a high success rate for large-scale prints without requiring a controlled temperature environment.Great for Painting & Customization:- ePLA-LW is highly receptive to paint, ensuring strong surface adhesion for detailed finishes.This makes it an excellent choice for projects requiring customization, such as RC planes, drone parts, and cosplay accessories.Strong Layer Bonding & Matte Finish:- Unlike wood-based PLA, ePLA-LW offers more stable interlayer adhesion.The foaming rate and material strength can be adjusted by varying the printing temperature between 210°C and 270°C.The final print has a delicate matte texture, is explosion-resistant, and is easy to repair.Optimized for Ultralight Prints:- When heated between 210°C and 270°C, ePLA-LW starts foaming, increasing its volume by approximately 1.2 times.This allows for a reduced extrusion rate of around 45%, helping create ultra-lightweight parts.In RC planes, lower weight improves flight performance by reducing wing load and stall speed, resulting in better overall aerodynamics.- With its combination of lightweight properties, strong adhesion, and easy finishing, eSUN PLA-LW is a reliable choice for high-performance applications where weight reduction is crucial. tradeinn Techinn

eSun ePLA-LW Black is a lightweight filament specially designed for aeromodelling. It is perfect for model aircraft, drones, cosplay and any other application that calls for lightweight 3D printed parts. ePLA-LW has a stable connection between layers and is easy to repair. The surface of the print will be matte and refined.The foaming ratio and strength can be adjusted as desired by adjusting the printing temperature. Between 210℃ and 270℃, this material will foam when printing. This will increase the volume almost 1.2 times. The extrusion can be reduced by up to 45% to print lightweight parts. Due to the foaming ratio of 220%, 55% less material is used per part than when using regular PLA. This way you achieve a part of the same size but with less weight. The active foaming technology creates practically invisible layers. Density from 0.54 grams per cm3 Foaming volume ratio of 220% Manually adjust the strength and foaming ratio Matte surface Good adhesion between layers Easy to paint Easy to print