eSun eSilk copper PLA filament 1.75mm, 1kg

Esun Epla-silk 1.75 Mm 1kg Filament. Elevate your 3D prints with ESUN EPLA-Silk filament! Achieve a stunning, pearly sheen and a silky-smooth finish with no extra polishing. This 1.75mm, 1kg filament boasts stable dimensional tolerance for consistent, high-detail prints with minimal warping or stringing. Enjoy tangle-free feeding and smooth extrusion, ensuring a high success rate. Perfect for artistic creations and eye-catching decor, EPLA-Silk offers the ease of PLA printing with a unique, glossy appearance. (EU Plug included). EU Plug.Shiny surface with silk luster, giving smooth, pearly and unique touch.No extra polishing needed, printing at a high detail results in a beautiful finish.Unique silky smooth appearance gives out shiny eye-popping glossy prints,.Features:Stable Dimensional ToleranceStable Dimensional Tolerance:- Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, no cracking, easy handling, resulting in an outstanding surface finish and are highly precise.Tangle Free & No Plugging:- 1KG filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle.Melt well, feed smoothly and constantly without clogging the nozzle or extruder, high successful printing rate.Wide Application:- Silk PLA adds shiny and smooth effect based on ordinary PLA, which is perfect for arts & crafts projects, vases and any other 3D printed items that could benefit from a outstanding shiny appearance.Good Printability:- Support structure is easy to peel off, smooth and flat printed surface.High toughness, not easy to break.Keep all the advantages of PLA, easy to print, low shrinkage, no deformation.Printing speed is faster than ABS, PC, PA and other material.Specifications:Basic Data:- Material:PLA.- Diameter:1,75 mm.- Weight:1,00 kg.- Length:344 m Printing Parameter:- Recommended Min Print Temp:190 ºC.- Recommended Max Print Temp:230 ºC.- Recommended Min Bed Temp:45 ºC.- Recommended Max Bed Temp:60 ºC.- Recommended Min Print Speed:40 mm/s.- Recommended Max Print Speed:100 mm/s.- Recommended Max Fan Speed:100 % General:- Specific Gravity:1,21 g/cm3 GB/T 1033 Elongation:- Elongation at Break:14,4 % GB/T 1040 Flexural:- Flexural Strength:65 MPa GB/T 9341.- Flexural Modulus:1447 MPa GB/T 9341 Other:- Impact Strength:5,86 KJ/m GB/T 1843. tradeinn Techinn

eSun's copper eSilk PLA filament from eSun has a glossy and silky-gloss texture. The printing surface is smooth. The material is easy to print and has a high toughness. This eSun eSilk PLA filament has a diameter of 1.75mm.