Faithfull Depressed Centre Metal Grinding Disc 100 x 6.5 x 16mm FAI1006MDG

This depressed centre metal grinding disc is designed for efficient stock removal on ferrous and non-ferrous metals. It is manufactured with aluminium oxide abrasive grit, fibreglass reinforcement, and resin bonding to provide safety and optimal performance. The disc is suitable for use with a range of machines from mini-grinders to stationary cutting-off machines and is manufactured to EN 12413 standard. Specifications include a diameter of 100 mm, bore of 16 mm, and thickness of 6.5 mm. For effective material removal, position the disc at approximately 45º and maintain the recommended rotational speed, applying steady pressure while letting the wheel do the work. Safety guidelines advise mounting the disc securely, aligning and tightening it properly, adjusting the guard to deflect sparks and dust, and inspecting the disc for damage before use. Always wear safety goggles and protective gear during operation and inspect the disc regularly to ensure safe performance.

Technical details and usage

Mount the disc securely onto the grinder, ensuring it is properly aligned and tightened. Adjust the safety guard to deflect sparks and dust. Check the disc for any damage before use. Use the disc at an angle of approximately 45º for effective material removal and maintain the recommended rotational speed. Apply steady pressure during grinding, letting the disc do the work. It is suitable for stock removal on ferrous and non-ferrous metals and can be used with a variety of machines from mini-grinders to stationary cutting-off machines. The disc is manufactured to EN 12413 and features aluminium oxide abrasive with fibreglass reinforcement and resin bonding for safety and performance.

Wear safety goggles and protective gear during use. Inspect the disc and guard setup, adjust the guard to deflect sparks and dust, and ensure proper mounting and alignment before operation.