Faithfull FAI2306SDG Stone Grinding Disc Depressed Centre 230 x 6 x 22.23 mm

This Faithfull Depressed Centre Stone Grinding Disc is designed for efficient stock removal on stone and concrete surfaces. It is manufactured using silicone carbide abrasive grit with fibreglass reinforcement and resin bonding to provide safety and optimum performance. Suitable for use with a range of machines from mini-grinders to stationary cutting-off machines, it delivers best results when used at a 45-degree angle. The disc has a diameter of 230 mm, bore 22.23 mm, and thickness of 6 mm and conforms to EN 12413. For installation, ensure the machine is turned off, verify the bore size matches your machine’s arbor, securely attach the disc to the spindle, and adjust safety guards as needed. For usage, work at approximately 45 degrees with moderate pressure, allowing the disc to do the cutting, and inspect the disc regularly.

Features

• Silicone carbide abrasive grit
• Fibreglass reinforced construction
• Resin bonded for safety and performance
• 230 x 6 x 22.23 mm size
• EN 12413 standard

Usage

Use the disc at approximately 45 degrees for optimal cutting, suitable for stock removal on stone and concrete. It is compatible with a range of machines from mini-grinders to stationary cutting-off machines. Apply moderate pressure during grinding and let the disc do the work. Inspect the disc regularly and ensure safety guards are adjusted to deflect sparks and dust.

Read the manufacturer’s instructions carefully. Wear goggles to guard against flying chips or dust. Inspect the disc condition frequently. Adjust the guard to deflect sparks and dust. Maintain appropriate revs and let the wheel do the work.