Fasizi SHT30 D Temperature Humidity Sensor Breakout 3.3v 5v For Arduino Arm RPi ESP8266
Prices from
3.99
Featured
|
£ 3.99 |
To Shop
|
|
£ 3.99 |
To Shop
|
| COMPARE ALL WEBSHOPS (2) | ||
Description
Amazon
These Temperature/Humidity sensors are some of the finest & highest-accuracy devices available. These have have a true I2C interface for easy reading. The SHT30-D sensor has an excellent ±2% relative humidity and ±0.3°C accuracy for most uses. Vin - this is the power pin. The chip can use 2.5-5VDC for power. To power the board, give it the same power as the logic level of your microcontroller - e.g. for a 5V micro like Arduino, use 5V. For a 3.3V controller like a Raspbery Pi, connect to 3.3V GND - common ground for power and logic
Description
(1)
These Temperature/Humidity sensors are some of the finest & highest-accuracy devices available. These have have a true I2C interface for easy reading. The SHT30-D sensor has an excellent ±2% relative humidity and ±0.3°C accuracy for most uses. Vin - this is the power pin. The chip can use 2.5-5VDC for power. To power the board, give it the same power as the logic level of your microcontroller - e.g. for a 5V micro like Arduino, use 5V. For a 3.3V controller like a Raspbery Pi, connect to 3.3V GND - common ground for power and logic
Product specifications
Related results
Featured Choice
£ 3.99
