fischer ULTRACUT FBS II 10 x 80 25/15/ US, 50 Pieces, 536860

Zoro Tools

The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. *With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses. *The special saw tooth geometry enables fast cutting into the concrete. *The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again. *The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates.

Amazon

With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval The FSW adjusting disc works with the fischer UltraCut FBS II 10 US concrete screw to easily install wooden beams / timber sleepers, Weight: 2.20462262 pounds, Manufacturer: fischer