fischer ULTRACUT FBS II 12 x 70 10/ / US, 20 Pieces, 536869

Fischer Group Ultracut Fbs Ii 12x70 10/-/-us Hex Head Concrete Screw 20 Units. Install concrete securely and efficiently with the fischer ULTRACUT FBS II. This innovative screw boasts a special saw tooth geometry for rapid concrete penetration, eliminating the need for drill hole cleaning in ceilings and floors. Its universal application with up to three embedment depths accommodates varied component thicknesses. Approved for multiple uses in temporary fixings, it´s ideal for railings, barriers, and formwork. Enjoy minimal edge and axial spacings due to expansion-free anchoring and superior performance in cracked concrete, even with seismic loads (C1/C2). The unique re-adjustment feature allows for precise alignment, making it the go-to solution for demanding installations. The fischer ULTRACUT FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example.Advantages:- With up to 3 embedment depths, the ULTRACUT FBS II US allows for the same screw to be used for different component thicknesses.- The special saw tooth geometry enables fast cutting into the concrete.- Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.- Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings.- The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.- The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.- The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval.Features:- With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses.- The special saw tooth geometry enables fast cutting into the concrete.- The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again.Specifications:- ETA-approval: Yes- Drill diameter: 12[mm]- Screw: 4 x 70[mm]- Screw-in depth with fixture thickness: 60 / 10[mm]- Screw-in depth with fixture thickness: -[mm]- Drive: SW17 - Packaging: Folding box - Amount: 20[Unit(s)]. tradeinn Bricoinn

With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses. The special saw tooth geometry enables fast cutting into the concrete. The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again.