FloPlast FloFit+ push-fit Equal Tee, WRAS approved (22mm, 10 Pack) 3-way tee for copper, PEX and PB pipe, hot cold

BRANCH OFF A PIPE RUN IN SECONDS: Three equal push-fit ends let you split one run into two, add a new tap, radiator or appliance feed, or tee into an existing line. Push the pipe in until it stops and the joint is made, with no soldering, flux, blowtorch or tools. FITS COPPER, PEX AND POLYBUTYLENE PIPE: Copper to BS EN 1057 pushes straight in; PEX or PB plastic pipe needs a FloFit+ pipe insert (sold separately). Compatible with other BS 7291 plastic push-fit systems of the same size, so it works alongside existing pipework. WRAS APPROVED AND KITEMARKED TO BS 7291: WRAS approval no. 2009549 for drinking water, Kitemarked to BS 7291 Parts 1, 2 and 3 including Class S. For hot and cold water, vented and unvented systems, sealed central heating and underfloor heating. SECURE GRIP AND WATERTIGHT SEAL: Stainless steel grip teeth hold each pipe while an EPDM O-ring seals it. White collet clips are fitted to stop accidental release, and red or blue clips are available to mark hot and cold runs. DEMOUNTABLE, UK MADE, 50 YEAR GUARANTEE: Remove the clip, push the collet in and the pipe pulls out for alterations or dry fitting. Made by FloPlast in Kent with a 50 year guarantee. 10mm, 15mm, 22mm and 28mm in packs of 1, 2, 5 or 10.