Fluke BT520 Battery Analyzer

Battery Voltage – During the internal resistance test, Fluke Battery Analyzers also measure the voltage of the battery under test Discharge Volts – The Discharge mode collects the voltage of each battery multiple times at a user defined interval during a discharge or load test. Users can calculate the time a battery takes to drop to the cut-off voltage and use this time to determine the capacity loss of the battery Ripple Voltage Test – Measures unwanted residual ac component of the rectified voltage in dc charging and inverter circuits. Allows users to test ac components in dc charging circuits and find one of the root causes of battery deterioration Meter and Sequence Modes – The Meter mode is used for a quick test or troubleshooting. In this mode you can save and read the readings in a measurement or time sequence. The Sequence mode is for maintenance tasks with multiple power systems and battery strings. Before a task starts, users can configure a profile for the task for data management and report generation BTL20 Interactive Test Probe set, with long and short probe extenders and built-in LCD display and speaker for visual and audio feedback

BATTERY ANALYZER, LCD, 3 / 30 / 300 / 3000 M OHM RANGE, 0.001 / 0.01 / 0.1 / 1 M OHM RESOLUTION, 6 / 60 / 600 VDC RANGE, 0.001 / 0.01 / 0.1 V RESOLUTION, 600 VAC - 45 TO 500 HZ WITH 800 HZ FILTER, 600 / 6000 MV RANGE, USB MINI INTERFACE, 4489981