Fnirsi 1014d Tester

Fnirsi 1014d Tester Clear . The FNIRSI 1014D is a versatile 2-in-1 oscilloscope and signal generator, ideal for electronics professionals and hobbyists. It features two 100 MHz channels with a 1 GSa/s sampling rate for detailed signal analysis, capturing even transient anomalies. The built-in DDS generator produces 14 standard waveforms up to 10 MHz for testing and simulation. A large 7-inch LCD screen provides clear viewing, while 1GB memory stores waveforms and screenshots, transferable via USB. Overvoltage protection safeguards against accidental damage up to 400V. This compact, feature-rich device simplifies circuit diagnosis, prototype testing, and educational applications. FNIRSI 1014D 2-in-1 oscilloscope signal generator.The FNIRSI 1014D is a compact digital oscilloscope designed for electronic service, research and development departments, technical education and hobbyists.It allows simultaneous analysis and signal generation, which significantly increases the range of applications when diagnosing circuits, testing prototypes or learning to work with waveforms.The device has two input channels with 1 M° impedance and supports a bandwidth of 100 MHz at 1GSa/s sampling.A 7-inch LCD screen with a resolution of 800×480 px facilitates operation.Auto-analysis, FFT, X-Y mode and cursor recording are possible.There is also a 1GB internal memory with the ability to store up to 1,000 waveforms and 1,000 screenshots, and data can be easily exported to a computer via USB.Fast signal analysis.A high sampling rate of 1GSa/s and a bandwidth of 100 MHz enable detailed analysis of analog and digital signals.This allows the device to catch even short-term anomalies in the waveform.Trigger modes include Auto, Single, and Normal, allowing the device to capture both interference pulses and regular analog signals, such as sinusoids.Built-in DDS generator.The integrated DDS signal generator supports 14 standard waveforms (including sine, rectangle, sawtooth, triangle), with precise frequency adjustment in 1 Hz increments.The solution used allows generating signals with accurate parameters for testing and simulation.The output frequency range reaches up to 10 MHz (for sine wave), which allows testing a wide range of electronic and signal circuits.Waveform capture function.Overvoltage protection.An integrated high-voltage protection module allows the device to safely measure signals up to 400V (with x10 probe), reducing the risk of damage to the device during measurements in mains-powered systems.The protection function works automatically, so accidental use of the probe without switching to x10 does not risk damaging the equipment.High readability display.Signal analysis functions.- FNIRSI 1014D 2-in-1 oscilloscope.- 100 MHz probe x2.- USB charger.- Manufacturer:FNIRSI.- Model:1014D.- Channels:2.- LCD screen size:7 inches.- LCD screen resolution:800 × 480.- Display technology:LCD.- Frequency response:100 MHz.- Sampling frequency:1 GSa/s.- Highest test voltage:1X:40V, 10X:400V.- Cursor:XY positionY trigger.- Rolling mode (roll):Supported.- Automatic calibration:Supported.- Waveform recording:1000 images + 1000 waveforms.- Waveform management:Supported.- Voltage accuracy:±5%.- Rise time:< 3 ns.- Memory depth:240 Kbit.- Input resistance:1 M°.- Sensitivity:50 mV ~ 500 V.- Time base:50 s ~ 10 ns.- Trigger mode:Single / Normal / Auto.- Trigger edge:Ascending / Descending.- Coupling:AC / DC.- Frequency accuracy:±0,01%.- Parameters:12 types.- Generator:14 types.- Capture output:Supported.- Extension:USB export.- Power supply:5V 2A / 3A / 4A.- Dimensions:310 × 145 × 70 mm. tradeinn Bricoinn