for Corsair Modular Power Supply Adapter Cable ATX CPU 8 Pin Male to Dual PCIe 2X (6+2) Graphics Vedio Cards 25 inch+9 inch (63cm+23cm)

🔹 CPU 8 PIN END — MUST PLUG INTO PSU CPU PORT, NOT GPU ⚠️ ⚠️ Critical: The 8-pin male end is an ATX CPU 8-pin (EPS 12V) connector. It MUST be plugged into your PSU‘s CPU/ATX 8-pin modular port — NOT a PCIe port, and NOT a GPU. ⚠️ Plugging this CPU 8-pin end into a graphics card WILL burn your GPU. CPU 8-pin and PCIe 8-pin have different pinouts. Check the port label before connecting. 🔹 FOR GPUs UNDER 288W — VERIFY YOUR GPU TGP FIRST ⚠️ ⚠️ PCI-SIG standard: each GPU-side 8-pin connector is rated for 150W. Two outputs = 300W rated capacity. Corsair official warning: “It is not recommended to use a single cable that splits into two 8-pin PCIe on graphics cards that use two PCIe connectors to consume over 288W.” ⚠️ Do NOT use for RTX 4090/4080/3090/3080Ti or any GPU exceeding 288W TGP — these require two independent PCIe cables from your PSU. 🔹 PRECISE MULTI-BRAND COMPATIBILITY — VERIFY YOUR PSU MODEL ⚠️ Designed for PSUs with Corsair Type 3/Type 4 modular layout: Corsair RM/RMX/RMi/HX/HXi/AX/AXi/SF/TX/TX-M/CS/CS-M/CX/CX-M series, Greatwall BTX-650SD/750SD/1000SD/EPS 1250DA/1560DA, Cougar CMX400W/450W/CX/GX800W/GX600W/GX1050W, Antec Neo Eco 400M/650M/550M, Thermaltake Smart SE530/SE730 & Toughpower XT Platinum 1275W/775W, OCZ 500M/700M XSP & 700W Mod X Stream-Pro. ⚠️ Verify your PSU model before ordering. 63CM+23CM DUAL-LENGTH DESIGN Dual-length design: 63cm main cable from PSU to first PCIe connector, +23cm from first to second PCIe connector. Total reach: 86cm (34 inch) — flexible routing for dual-GPU and multi-card setups. 6+2 pin detachable design works with both 6-pin and 8-pin GPU power ports. 🔹 FOR MULTI-GPU, MINING & DUAL-8PIN MID-RANGE GPUs Ideal for multi-GPU mining/rendering platforms, dual-8-pin mid-range GPUs (TGP under 288W), and systems where your PSU has limited PCIe cables. ⚠️ Two plugs at the output do NOT create a second power source — both outputs draw from the same original CPU 8-pin connection. For high-power GPUs, use two independent PCIe cables from your PSU. ⚠️ IMPORTANT NOTES: CPU 8-pin end → PSU CPU port ONLY. NOT for GPU. Misplugging WILL burn your GPU. Do NOT use for GPUs exceeding 288W TGP. For RTX 4090/4080/3090/3080Ti, use two independent PCIe cables. Two outputs draw from the same source. This is a splitter, NOT a second power supply. Verify PSU model before ordering. Check the compatible list above. Turn off PC power and unplug the power cable before installation.