Fuel Pipe 25mm (1") ID x 36mm OD, Nitrile Rubber Marine Hose 3m -40C to +100C (+120C Peak) 9.8ft Tank-to-Engine Runs Outer, 5.5mm Wall, 5/15 Bar Work/Burst Braid & Wire Helix

📏 25MM (1") BORE, 3M LENGTH – 25mm internal diameter, 36mm outside diameter and 5.5mm wall, supplied as one continuous 3 metre length (9.8ft, approx. 2.1 kg), ideal for a tank-to-engine run or a couple of lines. ⛽ NITRILE MARINE FUEL PIPE – a BS EN ISO 7840 fuel hose for inboard and outboard engines, tenders, narrowboats and workboats, also used on vehicles, plant and generators. The 25mm bore suits deck filler to tank lines, tank vents and fuel transfer and suction lines, where the wire helix resists collapse. 🛡️ NITRILE TUBE & COVER – smooth black nitrile rubber inner tube for petrol, diesel and oil resistance, high-strength polyester braid reinforcement, plus an embedded steel wire helix that stops the hose collapsing under suction, and a synthetic nitrile blend cover that resists saltwater, UV, ozone and abrasion. 🌡️ -40°C TO +100°C RATED – stays flexible from -40°C to +100°C with peaks to +120°C. This 25mm bore is rated 5 bar working and 15 bar burst pressure (3:1 safety factor), with a 216mm minimum bend radius. 🔧 CUT TO FIT ON BOARD – trim square with a sharp blade and secure each end with hose clips sized for the 36mm outside diameter. Longer lengths arrive as one continuous piece, so there are no joins in the run.