Garmin Msc™ 10 Marine Satellite Compass

Garmin Msc™ 10 Marine Satellite Compass. Experience unparalleled navigational accuracy with the GARMIN MSC™ 10 Marine Satellite Compass. This easy-to-install device uses multi-band, multi-constellation GNSS for precise positioning and heading, free from magnetic interference. With a rapid 10Hz update rate and an integrated AHRS, it delivers smooth, detailed tracking and reliable pitch, roll, and heave data, even in choppy seas. Seamlessly integrate it into your NMEA 2000® network as the primary sensor for autopilots and chartplotters to get a superior navigation experience. YOU WILL KNOW EXACTLY WHERE YOU ARE GOING Get reliable and accurate heading information with the easy-to-install, GPS-based MSC ™ 10 Satellite Nautical Compass.Accuracy is easier when you have a multiband GNSS receiver on board.Faster updates.More detailed tracking.Are you worried about the choppy sea? The MSC 10 device also provides pitch, roll and roll information.If other on-board systems need a heading sensor, we have what you need.MULTIBAND AND MULTIBAND GNSS The multi-band (GPS L1 and L5) and multi- constellation (GPS, Galileo 1, GLONASS and BeiDou 1 ) GNSS receiver provide precise positioning 2.ARFADA OF THE VESSEL AND MUCH MORE Get reliable and accurate information about the bow, pitch and roll of your boat, even in rough water.INTEGRATED HEADING AND POSITION REFERENCE SYSTEM (AHRS) The integrated AHRS provides better GPS heading information at high speed.ACCURATE HEADING DATA Various receivers provide heading accuracy within a 2 degree radius.Since it uses satellite signals, you won´t have to worry about magnetic interference.MAIN SENSOR IN VARIOUS SYSTEMS You can use the MSC 10 compass as the primary sensor for autopilots and other onboard systems that need accurate heading information.COMPATIBILITY WITH NMEA 2000® NETWORK Get heading, pitch, roll, and heading information directly to your compatible Garmin chartplotter over the NMEA 2000 network.Designed for a better browsing experience.EASY INSTALLATION This compact device is easy to install and easily integrates into your Garmin marine ecosystem.10HZ UPDATE FREQUENCY Get more detailed and accurate tracking information thanks to the 10 Hz position refresh rate.AUXILIARY HEADING SENSOR In the hypothetical event that the satellite signal is lost, the MSC 10 will seamlessly switch from the GPS-based heading option to the magnetometer-based option 3.- Dimensions (W x D x H):155.5 x 333.6 x 76.2 mm (6.1 ″ x 13.1 ″ x 3.0 ″).- Weight:810 g (28.6 oz).- Cable length:6 m (19 ft 8 in).- Temperature range:- 15 to 70 ° C (5 to 158 ° F).- Housing material:High impact, glue-sealed plastic alloy, waterproof to IPX7 standards.- Compass safe distance:0 mm (0 ″).- Power supply:9 to 32 VDC, irregular.- Power outlet:180 mA at 12 V DC.- NMEA 2000 Load Equivalence Number (LEN):6 (300 mA max).- Position accuracy, typical marine use:. tradeinn Waveinn

Built-in attitude and heading reference system to filter and smooth GPS-derived heading Seamlessly transition from GPS-based to magnetometer-based heading if you lose satellite signal (magnetometer calibration required for backup magnetic heading support) Get accurate heave information right on your chartplotter through the NMEA 2000 network Multi-band GNSS (L1 and L5 GPS) receiver delivers accurate positioning within 1 meter; heading accuracy of 2-degree RMS in dynamic situations Use as the primary sensor for autopilots and other onboard systems Works with multiple satellite constellations for faster, more reliable positioning Compact device is simple to install with no calibration required, unless using magnetometer-based heading Easily integrates into your Garmin marine ecosystem 10 Hz position update rates for high-sensitivity tracking