GEDORE Red Tool Set in Foam Modules 119 Pieces
Description
Zoro Tools
suitable for tool trolley MECHANIC 2046.10 / 2046.20 Square plug-in handle 1/4", 1-component handle with female square Socket 1/4" hexagon: Metric, short, to DIN 3124, ISO 2725 Screwdriver bit socket 1/4" for in-hex screws: Pressed-in, phosphated pin Screwdriver bit socket 1/4" slotted, PH, PZ, TX with drill hole: Pressed-in, phosphated pin Socket extension 1/4" Sliding T-handle with slide 1/4": Acc. to DIN 3122, ISO 3315 Universal joint 1/4": Joint bolted on, design to DIN 3123 - C 6.3 2C reversible ratchet 1/2": To DIN 3120 - A 12.5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, 2-component-handle Socket extension 1/2" Sliding T bar 1/2", with slide, to DIN 3122, ISO 3315 Universal joint 1/2": Joint bolted on, design to DIN 3123 - C 12.5 Socket, hex: Metric, short, to DIN 3124, ISO 272 Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15 jaw position, surface matt satin, plate-chromed Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated Chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, 2-component-handle, forged Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, forged Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, 2-component-handle, forged Engineers hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Flat cold chisel, flat oval: To DIN, cutting edge and head ground, impact end tempered, chrome-vanadium steel Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel 2C screwdriver slotted and PH: To DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle 2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II
Description
(2)
suitable for tool trolley MECHANIC 2046.10 / 2046.20 Square plug-in handle 1/4", 1-component handle with female square Socket 1/4" hexagon: Metric, short, to DIN 3124, ISO 2725 Screwdriver bit socket 1/4" for in-hex screws: Pressed-in, phosphated pin Screwdriver bit socket 1/4" slotted, PH, PZ, TX with drill hole: Pressed-in, phosphated pin Socket extension 1/4" Sliding T-handle with slide 1/4": Acc. to DIN 3122, ISO 3315 Universal joint 1/4": Joint bolted on, design to DIN 3123 - C 6.3 2C reversible ratchet 1/2": To DIN 3120 - A 12.5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, 2-component-handle Socket extension 1/2" Sliding T bar 1/2", with slide, to DIN 3122, ISO 3315 Universal joint 1/2": Joint bolted on, design to DIN 3123 - C 12.5 Socket, hex: Metric, short, to DIN 3124, ISO 272 Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15 jaw position, surface matt satin, plate-chromed Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated Chrome-vanadium steel Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, 2-component-handle, forged Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, 2-component-handle, forged Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, 2-component-handle, forged Engineers hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge Flat cold chisel, flat oval: To DIN, cutting edge and head ground, impact end tempered, chrome-vanadium steel Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel 2C screwdriver slotted and PH: To DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle 2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, 2-component-handle, 5-edge grip head, elongated hole in handle Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II
AmazonSquare connection according to DIN 3120, ISO 1174, with ball lock Square drive according to DIN 3120, ISO 1174, with ball groove Chrome vanadium steel, matt satin chrome-plated 2K reversible ratchet 1/4 inch: according to DIN 3120 - A 6.3, ISO 1174, clockwise / anti-clockwise rotation can be switched using lever, push button release, fine-toothed, oval head, 2-component handle Square drive handle 1/4 inch: 1-component handle with internal square, Manufacturer: GEDORE
Product specifications
Price History
Related products
To Shop
