Genmitsu CNC Dust Shoe ABS Cover Cleaner for 3018 Series Router/CNC Machines with a 42mm Diameter Motor, Hose Adapter Outer 38mm, Transparent

COMPATIBILITY: Designed for Genmitsu 3018-PRO, 3018-PROVer, 3018-PROVer V2, 3018-PROVer Mach3, 3018-MX3 and Cubiko CNC machines. Also fits other CNC routers with a 42mm (1.65in) diameter spindle motor and two 4mm (0.16in) screw holes. Please check your spindle size before ordering CLEAR VIEW, CLEAN WORKSPACE: Made of high-quality transparent ABS, so you can watch the bit and the cut at all times. The 40mm long nylon brush seals around the work area to maximize vacuum suction and sweep away chips, keeping your machine and workspace clean while cutting, drilling and carving MAGNETIC SPLIT DESIGN, TOOL-FREE BIT CHANGE: The two-piece magnetic structure is light, durable and easy to install in just 3 steps. To change bits, simply pop off the bottom cover with no tools needed, then snap it back in place FIRMLY PLANTED BRUSH, EASY TO MAINTAIN: The brush is planted into the cover rather than glued, so it stays neater and firmer than glued brushes. When the bristles wear out, simply replace the whole bottom cover instead of removing and re-gluing a brush. If the bristles are too long for your bit, trim them from the bottom to match the bit length, so they do not press against the stock when cutting starts SPECIFICATIONS: Spindle diameter: 42mm (1.65in). Hose adapter outer diameter: 38mm (1.5in), fits most standard shop vacuum hoses. Brush length: 40mm. Material: transparent ABS and nylon