GODIAG GT100+ OBDII Breakout Box, ECU Connector with OBD Main Line & Multi Function Jumper CANBUS/K Protocol Detector for Bench Testing, Check Engine, Support Voltage Current Value Display

【Help You VerIfy Communication, Power, Grounds】Before connecting to your costly scan tools, you can use GT100+ to verify the networks are communicating properly, or that there is proper power and grounds being supplied to the box assembly. In the case you do not have proper power or ground, It might burn your expensive scan tools. 【Variety ECU Connection】GT100+ allows you to power the ECU from the bench. You can connect just one ECU module when testing the car's ECU, but also multiple ECU modules for easy access to do professional diagnostics and programming. Multiple ECU modules can be connected when testing a single module. 【16 Pins Design & 1.2m Extension Cable】The input jack layout of OBD2 protocol detector fully simulates the 16-pin layout of the OBDII interface, allowing more tests to be performed quickly and intuitively. When the OBD2 scanner communicates with vehicles, all 16 pins of OBDII breakout box can be easily connected. OBD2 breakout box has female connector and male connector with a 1.2m extension cable. 【Added CAN BUS and K-LINE Protocol】GT100+ not only check all obd2 diagnostic socket pins, but also non-standard OBD2 protocols, like the port 1,9,3,11,12,13,and 8. It can test CAN BUS and K-LINE protocols. 【Voltage & Current Value Display】Godiag GT100+ will display the voltage/current values after the ECU module has been connected to the bench using the banana connector or the DB25 dedicated ECU connector. This allows you to visualize the current status of the ECU. If no current is displayed or the actual current displayed does not correspond to your expected current, then you can immediately check if there is a problem with the wiring.