Hpi Racing Srl706 3in1 Esc/rx/led Electronic Speed Controller

Hpi Racing Srl706 3in1 Esc/rx/led Electronic Speed Controller Silver . Upgrade your 1/18 scale RC vehicle with the HPI RACING SRL706 3-in-1 ESC/RX/LED controller! This compact, waterproof unit combines your receiver, speed control for brushed motors, and LED light controller, offering five selectable light modes and two driving modes. Perfect for touring cars, trucks, and rock crawlers, it supports 2S LiPo or 5-7 cell NiMH batteries and features adjustable drag brake. Enjoy your adventures, rain or shine!. The 3-in-1 ESC/RX/LED controller SRL-706 is a combination of receiver, speed controller, and light controller for RC vehicles up to 1/18 scale.Whether you have a touring car, a truck, or a rock crawler, this is the ideal unit to control the power of any 1/18 vehicle equipped with a brushed motor.The SRL-706 is also waterproof, making it perfect for anyone who enjoys playing at the beach, in the snow, or even in the mud! Features of the SRL-706:- Works with the TF-706 transmitter - Built-in LED controller:5 selectable light modes from the transmitter - Adjustable parameters via the DIP switches of the TF-706 - 2 Operating modes:F/B/R (normal mode), F/R (Rock Crawler) - 2 Battery modes:LiPo or NiMH - Adjustable drag brake - Operating voltage:2S LiPo / 5-7 Cell NiMH - BEC output:6V/1A - Continuous/peak current:10A/50A - Dimensions:33x30x12mm (without capacitor) - Weight:11g NOTE:Before driving in wet conditions, ensure that all electronic components installed in the vehicle are safe to use (marked as waterproof or water-resistant), or that they are completely sealed and protected from water and moisture (such as in a sealed receiver/battery box).Fans mounted on speed controllers are not waterproof - we recommend disconnecting the fan from the ESC before driving in wet conditions and allowing it to dry completely before reconnecting the fan power.Lubricate exposed metal parts of the drivetrain, such as bearings, external drives, and differential axles, before driving in wet conditions.Motors are not designed for submerged use and may be damaged if used underwater.After driving in wet conditions, be sure to clean off dirt and any corrosive liquids like saltwater with running water and re-lubricate the metal parts of the drivetrain.Download PDF instructions for 160832 (18.8 MB). tradeinn Techinn