Hpi Racing Vorza 1/8'' 4wd Flux Elh-6s 2.4ghz Rtr Brushless Rc Buggy

Hpi Racing Vorza 1/8´´ 4wd Flux Elh-6s 2.4ghz Rtr Brushless Rc Buggy Red . Unleash extreme speed and off-road dominance with the HPI Racing Vorza 1/8 4WD Flux ELH-6S RTR Brushless RC Buggy. This legendary buggy returns, boasting a proven design and updated features for unparalleled performance. Equipped with a powerful FLUX brushless system capable of over 100 km/h, adjustable suspension, and a durable 6061 aluminum chassis, the Vorza is built for high-level racing and epic stunts. Its low center of gravity, Big Bore shocks, and robust transmission ensure exceptional handling and control on any terrain. Experience thrilling, ready-to-run RC action straight out of the box!. Vorza 1/8 Truggy 4WD FLUX ELH-6S 2.4GHz +100km/h - Red HPI-160181.-The new VORZA line has ARRIVED!!.-And it has seriously maintained its performance!.- The Buggy and Truggy have been a very important off-road line for HPI for many years.Therefore, it was time to update this range of epic off-road cars, and staying true to the Vorza roots was easy!.Initially, the Vorza was a competition car designed to be accessible, adjustable, and above all, FUN!! And that´s why HPI decided to bring it back in 2022.Fully adjustable, highly capable, and a genuine HPI!.Under the body, the New Vorza Truggy features a wide range of durable and adjustable features that make it a joy to drive! The Vorza has maintained its winning design and is equipped with the FLUX motor that will offer you impressive speed and handling.It´s a ready-to-run (RTR) buggy prepared to take BMX jumps.Get ready to feel the thrill! You can take it to any track, as it is ready for high-level racing - after a few flips, you will surprise your friends! .The Vorza Flux chassis has inherited its great performance, thanks to its powerful motor, adjustable suspension, and transmission.Try adjusting your Vorza Flux to your liking!.In 2022, the Vorza Buggy acquired a completely new look, a totally new body with matte and gloss tones and new custom paint colors! Even the wheels and tires got completely new designs for a true Stop at Nothing ´´ attitude!! .-PROVEN DESIGN .LAYOUT.- Its low-profile chassis will allow for easy driving, as well as help you navigate turns with ease thanks to its low center of gravity.The extra-thin 6061 aluminum chassis features side guards to protect from dirt and keep rocks and debris away from the gears and drive shafts.The Vorza Truggy is an easy dream to achieve!.Powering the VORZA Flux is equipping it with an ultra-powerful Flux setup, consisting of the HPI FLUX MLH-2200 motor and the ELH-6S speed controller.These components are powerful on their own, now imagine them together. Together they provide unstoppable force! .-The FLUX MLH-2200 motor has enough power to do everything you want with your NEW Vorza Flux:giant aerial stunts, multiple backflips, colossal top speeds, and spinning sideways action! It also features a sleeker heat sink, with 11 radial fins surrounding the black anodized motor case for excellent cooling action.With a 5mm motor shaft, it can fit any optional pinion for the Vorza, so you can achieve even MORE top speed for those insane races or tone it down to increase acceleration and jumping power on the track.6.5mm bullet connectors on 12-gauge motor connector wires transmit maximum power from the speed controller for instant acceleration.The FLUX MLH-2200 is mounted to the 6061 aluminum chassis by a double-clamp style aluminum mount so it doesn´t move or shift under the immense amount of torque it can pull.It also allows for motor removal without affecting the gear mesh.Please see our recommendation below regarding LiPo batteries above 4000mAh and 40C to get the most out of the Vorza FLUX electronics.The FLUX ELH-6S ESC is the perfect match for the FLUX MLH-2200 motor - up to 150 amps of power, you´ll have the opportunity to perform any trick or stunt you´ve ever dreamed of!.-The FLUX ELH-6S ESC can handle 2 3S LiPo batteries (total of 6S LiPo power!) and thus perfectly utilize the MLH-2200 motor! 6.5mm bullet connectors secure the motor wires for a lossless connection.Above the heat sink is a large fan within a protective cover to keep it cool during high temperatures.- Technical Specifications:Input Voltage:3-6S LiPo Continuous Current:150A Burst Current:950A Resistance (Ω):0.0035 Motor Limit:4S LiPo <.3000KV, 6S <.2400KV BEC:6V/3A Switching BEC Connector:6.5mm Bullet Dimensions:59.5x48x42mm Weight:178g.- Motor and Battery Combinations.FLUX motors (brushless) require very powerful batteries to get the most out of them - make sure you are using the right combination! HPI recommends using LiPo batteries above 4000mAh and 40C.Using batteries with lower ratings or using lower quality LiPo batteries may cause damage to the battery and/or the speed controller.Using batteries below the specified ratings may void the warranty of the speed controller and/or batteries.The term Kv refers to the number of RPMs that motors will attempt to provide per applied volt and is a standard term for brushless motor power. -NEW TIRES .WHEELS.- The new Vorza deserves a new set of wheels and tires! A new model of high-impact nylon Truggy tires 4.0´´ 8-Spoke for 17mm wheel adapters, is yet another addition to the TREDZ tire range ´´by HPI Racing´´.The Tredz Voodoo 4.0´´ tires have been designed for high performance, using the S compound tested and proven by HPI.The rotational tread pattern Voodoo works very well on a variety of surfaces, from hard dirt to synthetic grass. -RELIABLE AND SOLID TRANSMISSION.- The Vorza offers a spiral cut that is more reliable and much stronger than standard straight-cut gears, providing extra confidence and less maintenance headaches.You can adjust the differential action with thicker or thinner oils, as all three differentials are sealed against leaks, providing a fantastic increase in adjustability! .The Vorza Flux is equipped with 5000 oil in the front and rear and 100,000 in the center to support the 6S power that is needed!.-ADJUSTABLE BATTERY BOX.- To securely fit a pair of batteries in the chassis, the Vorza FLUX uses the classic adjustable and robust battery tray, equipped with a pair of secure Velcro straps.The length and width of the battery tray can be adjusted to accommodate a wide variety of pack sizes.Matching pairs of 2S or 3S batteries on the edge, or a single 4S or 6S pack are easily secured in place.The tray features an adjustable internal width restrictor and two rubber cushioning pads, along with foam protection on all 4 sides, all to help keep the packs secure and protected.A Durable Model!.- The front suspension has a long list of features, including reverse steering blocks, adjustable roll center, thick standoffs, aligned master pin, and universal joint drive shafts, stabilizer bar, and counter-rotating shock mounting screws.The 106mm long and 16mm round Big Bore shocks smooth out the ride and provide plenty of adjustments, while the arms withstand jumps, dives, and landings.The enhanced and robust HD high-impact suspension mounts securely attach the solid suspension arms to the chassis. -GOOD PERFORMANCE OF BIG BORE SHOCKS.- Four 16mm Big Bore shocks are essential for effective suspension on the Vorza.Each has an extra thick 4mm shaft, a threaded shock cup for precise ride height adjustment, steel mounting hardware, and self-tightening lower mounting screws.A full range of adjustment options is included to allow you to adjust the damping effect, and the sealing rings prevent shock oil from leaking out of the body. -EASY TO ADJUST!.- With a race-winning suspension design, you can experience pure driving feel and total adjustability like never before! Adjust the Vorza to your driving style and track conditions with the help of a full range of adjustments:shock position, oils, springs, pistons, roll center, wheelbase, camber, stabilizer bars, and much more! .-NEW RADIO.- Like all HPI cars, the Vorza buggy is easy to drive with the included radio.The new 2.4Ghz FHSS TF-50 transmitter features:.Foam steering wheel for added comfort.-Adaptable steering wheel design for left-handed users!.-Rubber grips for finger and thumb.-Rubber protection on all corners for added protection.-Magnetic area on the base to hold tools or screws while performing maintenance!.-On/Off Digital.-Sound alerts if you leave your radio on, as well as battery duration.-Possible functions:Servo Reverse, EPA, Trims, and Dual Rate.The NEW RF-50 receiver has a waterproof silicone internal cover for use in any weather and a fail-safe protection.Signal on the RF-50 for FLUX cars and Signal and battery duration for RF-50N on Nitro!.MYHPI:THE BEST RESOURCE FOR YOUR VORZA TRUGGY FLUX TRUGGY.- Once you have your Vorza FLUX buggy, add it to your MYhpi garage for direct information on what will make your car faster, more adjustable, and easier to tune.Add your entire HPI collection to your MYhpi garage so you can directly access manuals, videos, tips, and help for each of your HPI cars!.Pre-painted and decorated body.-Pre-mounted tires (you should tighten the wheels before first use).-High torque metal servo.-6S LiPo capacity.-MLH-2200 2200KV brushless motor with 5mm shaft.-150A ELH-6S waterproof speed controller.-Adjustable LiPo battery holder.-Aluminum fan for better motor cooling.-Full-time 4WD for exemplary control.-16mm Big Bore oil shocks for more effective control.-4mm aluminum front/rear towers.-4mm 6061 aluminum chassis.-Front and rear stabilizer bars.-Good adjustability:wheelbase, camber, stabilizer bar, and more.-Hard steel pinion for extreme durability.-Bevel differential pinion and rack for better balance between strength and efficiency.-4-wheel drive transmission.-Championship-based suspension.-2.4GHz Radio with waterproof receiver.-Closed receiver box.- HPI-160181 VORZA TRUGGY FLUX 1/8th Scale 4WD Electric Truggy with FLUX Brushless System, 2.4GHz Radio System and painted body.- Features:Length:508mm.- Width:408mm.- Height:200mm.-Wheelbase:...