Ideal Electrical 30 4951 FT 45 Replacement Blade for 495 Feed Thru Crimp Tool, 1 Set

MODULAR PLUG CRIMP TOOL: FT-45 is a simple, compact and highly effective modular plug crimp tool for installers and techs to terminate RJ-45 connectors on to CAT5e, CAT6 or CAT6A twisted pair cable. COMPATIBILITY: This replacement blade works with IDEAL 30-495 FT-45 Feed-Thru Crimp Tools. Blade is ideally designed for trimming excess conductor length on feed-thru connectors. PRECISE TERMINATION: During crimping, the FT-45 crimp tool cleanly shears the excess conductors and leaves a smooth finish at the end face of the Feed-Thru connector. This minimizes accidental shorting of conductors or inadvertent contact in plug jacks. INSTRUCTIONS: Remove screw securing existing blade to tool. Carefully remove blade and spacer. Place new spacer and blade into position on the tool, with the beveled side of the blade facing toward the outside of the tool. Replace and tighten screw. SPECIFICATIONS: The pack includes a replacement blade, spacer, and screws for quick fitting. Blades typically last for 2000 terminations before requiring replacement.