INNOVAYOU 100ml Thread Lock Red, High Strength Tight Anti Rust&Loosening, Locktight Threadlock for Gap Filling and Tighten Bolts Nuts Fasteners Square Bottle

Threadlocker are suitable for automobiles, ships, hardware, industrial machinery and other kinds of metal fasteners, threadlocker with gap filling, anti-rust and anti-loosening, high temperature resistance, oil resistance and other characteristics. Locktight is a high-strength, oil-resistant, temperature-resistant thread sealant, mainly used for sealing and fixing nuts, bolts, bearings, fasteners and screw threads. Maximum filler gap: 0.13 mm, operating temperature: -54 ~ 149 ℃, destructive torque: High Strength greater than 20N·m, medium strength greater than 18N·m. High strength thread lock red, for locking and sealing of threads below M20, threads above Dn65 need to be coated on both sides to isolate the air, otherwise the lock tight may not cure. Use steps: 1. Keep the surface clean; 2Add enough thread locker to the end of the screw, 3. After application, the nut needs to be tightened to the locktite position within 3 minutes, wait for 20 minutes for initial curing and 24 hours for complete curing. Note:1. Do not mix with metal, oil and dirt. Half-Bottle Package: The blue threadlocker in the anaerobic adhesive is a single-component adhesive. Blue locktight will remain liquid when exposed to air. If it is lacking air, threadlocker blue will solidify. Therefore, the product is sold in the form of half a bottle (50ml).