IsoLAB Isopropyl Rubbing Alcohol 70% Fast Drying Isopropanol IPA Solution for Surface Preparation, Residue Control, Electronics & DIY 250ml

Made for 3D Printing - Cleans the jobs makers do every day: wiping PEI and glass build plates to restore first layer adhesion, washing uncured resin off prints, supports and tools, and cleaning spills from vats, printer bodies and work mats. A fast-drying isopropyl alcohol for FDM and resin printer owners, print farms, schools and makerspaces. Resin Print Washing - Use as the first wash bath for SLA, MSLA and DLP prints to strip most of the liquid photopolymer before a final rinse, then cure as normal. Works in wash and cure stations, ultrasonic cleaners and simple two-tub setups. For the cleanest final rinse on detailed miniatures, pair it with IsoLAB 99.9% isopropyl alcohol. Build Plates and Bed Adhesion - Fingerprints and skin oil are the most common cause of prints lifting or failing to stick. A quick wipe of PEI, textured PEI, glass and G10 beds removes oils and old glue stick or hairspray film, helping your first layer go down flat. Also cleans nozzles, scrapers, flush cutters and spatulas. Resin Spills and Tool Cleaning - Lifts sticky, uncured material from scrapers, silicone mats, gloves, funnels, measuring jugs and the outside of resin vats before it cures in place. Ideal for keeping your print area tidy between prints. Always wear nitrile gloves and eye protection when handling resin, and keep IPA away from acrylic printer covers. Sizes and Safe Use - 250ml for bed wiping and spot cleaning, 500ml for regular tool clean-up and 1L to fill a wash station. Filter and reuse wash IPA by letting it settle or curing the residue in sunlight before disposal, and never pour used IPA down the drain. Highly flammable: keep away from heat and flames, use in a ventilated area and store sealed.

Precisely Formulated 70% Isopropyl Alcohol - A balanced isopropanol solution developed for functional cleaning, surface preparation and controlled residue removal. Fast-Drying with Controlled Evaporation - Designed to evaporate efficiently after application, helping surfaces dry quickly with minimal streaking or build-up. Effective for Surface Preparation Tasks - Commonly used to remove grease, fingerprints and light surface contamination prior to assembly, maintenance or finishing work. Suitable for Electronics, Tools and Equipment - Appropriate for screens, devices, tools and components where a low-residue, fast-drying solution is required. Consistent Performance for Regular Use - A reliable option for household, DIY and light technical environments where repeatable results are important.