JG Speedfit UTS147 DB Pipe Insert, Blue, 20 mm, Set of 10 Pieces

City Plumbing

Speedfit offers coil and straight lengths of plastic pipe. All Speedfit pipe contains a 'barrier' that inhibits the ingress of air into the system. Long lengths of plastic pipe creates an easier installation environment with fewer fitting joints required. Always use a Speedfit pipe insert when using Speedfit pipe. Two types of pipe inserts are available: Standard and Superseal. The Superseal insert contains two 'o' rings to provide even greater sealing security. Both types of inserts are suitable for JG Speedfit hot and cold water and heating systems. However, should an installation be required using a compression fitting, a TSM standard insert must be used. To be used when connecting Speedfit pipe to a Speedfit fitting or connecting Speedfit pipe to a compression fitting. Note: inserts must be used on all Speedfit connections. Designed, manufactured and assembled in the UK by John Guest Speedfit.

Plumbing Superstore

The John Guest Speedfit MDPE Pipe Insert - 20mm is ideal for providing support and securing connections for medium-density polyethylene (MDPE) fittings using compression fittings. It ensures your pipes remain intact and properly shaped with an easy push-fitting installation. This fitting is designed only for cold water use and is simple and quick to apply. Prevents the pipe from collapsing under the fitting’s grip and provides a firm backing for the O ring. Simply push the insert fully into the pipe before fitting, no tools or joint compound needed. It is specifically suited to MDPE pipes and proudly crafted in the UK.. John Guest Speedfit MDPE Pipe Insert - 20mm Plastic

Amazon

Inserts must be used on all Speed fit MDPE connections Lead free and non-toxic, no scale build up and corrosion free BSI and WRAS approved Made and assembled in the UK by John Guest, Weight: 0.007936641432 Pounds, Manufacturer: John Guest Speedfit Limited