JIAANDA K 1000C UCS2904RGBW GS8208 SK6812RGBW WS2811 DMX LED Controller;1536 Pixels DC5 24V Addressable Programmable Controller with SD Card

1.It supports all the smart IC on the market . Including 1.WS2812B,WS2811,SK6813,SK9822,SK6812RGBW,APA102C,UCS8904RGB,GS8208B,etc . All the dual data led chip , data and clock led chip,single data led chip .Support SD card 128MB-32GB. Install LEDEDIT software on window computer.Can not work with Mac 2.32 levels-65536 levels of gray control, software gamma correction processing. Support points, lines, areas, rules and shaped handles. Single port output can support 2048 pixels. Multiple controllers can be cascaded together and work synchronously Compatible with single-wire or two-wire chips. 3.It supports LED strip/ LED matrix panel/Special-shaped/different data directions project. Various special lighting effect. like effects-firework ,chasing,rainbow,scrolling text,single color,full color,running etc . There is a lighting effect library in the LEDEdit software . You also can use some videos/pictures as your own lighting effect library . 4.512 pixels 30 frames/second, 1024 point pixels 25 frames/second and 1536 pixels 15 frames/second. Max control WS2812B 1536 pixels.Usually we recommend 1000-1500 pixels. More pixels will decrease the speed of data transmission. 5.Press and hold the “speed+”electrify, and switch between RGB and RGBW.Lamps of RGB three channels should select K-1000-RGB. Lamps of RGBW four channels should select K-1000-RGBW. Lamps of more than four channels should select K-1000-RGBWYA. Lamps of single channel should select K-1000-W. At this time, one channel represents one pixel, and the software effect is white light