John Guest Speedfit 15MMX1/2" BSP Push Fit Flexi Hose

Zoro Tools

Flexi hoses are manufactured to a high quality you would expect from Speedfit. The hoses are suitable for hot and cold water services, have a working pressure of 10 Bar and have WRAS and NHBC approval. Length: 300mm. Push-fit Solution for Plumbing & Heating Systems For use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes Speedfit fittings can be used with copper pipe to BS EN 1057 and Speedfit cross-linked polyethylene (PEX) Barrier Pipe to BS7291. NOT to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards Speedfit products are designed and manufactured under a fully integrated system assessed by B.S.I. to BS EN ISO9001. They are approved by the Water Regulations Advisory Scheme and BBA. Speedfit PEM and PKM fittings and Speedfit barrier pipe are kitemarked to BS7291 Part 1 and 3, Class S. (Licence No. KM39767). Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings. Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight. When used outdoors protect from ultra violet light by lagging or painting. It is recommended that all installations are checked prior to use to determine that a seal has been made.

ManoMano

JG Speedfit x union nut flexi hose (braided) for the connection of pipe to a male thread appliance, such as a tap. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit x union nut flexi hose is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. An alternative to hard piping to a tap or fixture Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux Braided stainless steel outer layer protects the internal feed from damage Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (6 Bar @ 65 °C)

Plumbing Superstore

The John Guest Speedfit Push-Fit Flexi Hose & Union Nut is designed for connecting the Speedfit system to male-threaded appliances. Its flexible steel construction makes it perfect for confined spaces like kitchens and utility rooms, suitable for residential and commercial plumbing. This single hose offers a reliable, secure fit with Speedfit collet clips, ensuring easy installation. It's fully demountable and WRAS-approved, ensuring compatibility with numerous systems. Available in various sizes, it adapts to specific needs. This robust and user-friendly hose is ideal for installers and DIY enthusiasts. Compatible with male-threaded appliances, it joins easily and securely. The product is a single unit. John Guest Speedfit Push-Fit Flexi Hose & Union Nut - 15mm x 1/2 inch x 300mm.. John Guest Speedfit Push-Fit Flexi Hose & Union Nut - 15mm x 1/2 inch x 300mm Plastic Stainless Steel