John Guest Speedfit Flexi Hose Plastic Wingnut 15mm x 3/4 inch 300mm PVC

Plumbing Superstore

This hand-tighten-only flexi hose is suitable for the connection of plastic or copper pipe onto a male thread appliance such as a tap and has been designed, manufactured and assembled in the UK by John Guest Speedfit. The flexi hose with an SV also features a valve to isolate the water supply.On one end, this hose features a push-fit connection for a supply pipe and on the other end, there is a plastic nut which can be hand tightened onto a tap or male thread. If the need arises to demount the pipe, simply push the collet towards the body of the fitting and pull the pipe to release. Installation can be reduced by around 40% against traditional fixing methods. Features & Benefits: John Guest Speedfit Flexi Hose Plastic Wingnut - 15mm x 3/4 inch x 300mm, Sold in singles, 6 Bar at 65C, Push-fit and demountable connections, WRAS approved, PVC hose material, Range of sizes available, For the connection of plastic or copper pipe onto a male thread appliance, Speedfit x union nut, Plastic wingnut, Hand tightened The strictest control is maintained by virtue of the fact that design and manufacture are carried out in modern purpose-built manufacturing centres in west London and at Maidenhead in Berkshire. Maintaining control over the whole process from initial tool design and tool making through to final assembly and testing ensures that this flexi hose is produced to the highest quality. John Guest Speedfit believe that it is this commitment to quality that has led to it receiving awards from many of the world™s leading testing and approvals organisations. Please note: , With all plastic pipes, the relevant manufacturer™s insert is required., This flexi hose is not suitable for central heating systems.. John Guest Speedfit Flexi Hose Plastic Wingnut - 15mm x 3/4 inch x 300mm PVC

ManoMano

JG Speedfit x hand tighten flexi hose (white PVC) for the connection to a male thread appliance, such as a Tap. The white PVC hose material significantly reduces hose ‘kinking’ and makes the product easier to clean. On one end the hose features a push-fit connection for a supply pipe. On the other end there is a plastic nut which can be hand tightened on to a tap or male thread. To demount the push-fit end, simply push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit x hand tighten flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. An alternative to hard piping to a tap or fixture Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux White PVC design stops the pipe kinking and makes cleaning easier Grip & Seal collet with stainless steel