John Guest Speedfit PEM0215W 15 mm Equal Tee

Zoro Tools

Connects plain pipe end to end. Push-fit Solution for Plumbing & Heating Systems For use with mains fed and indirect cold water systems, vented and unvented hot water systems, vented and sealed central heating systems. Pipes Speedfit fittings can be used with copper pipe to BS EN 1057 and Speedfit cross-linked polyethylene (PEX) Barrier Pipe to BS7291. NOT to be used with gas, fuel oil or compressed air applications. Speedfit fittings cannot be used on stainless steel pipe. Standards Speedfit products are designed and manufactured under a fully integrated system assessed by B.S.I. to BS EN ISO9001. They are approved by the Water Regulations Advisory Scheme and BBA. Speedfit PEM and PKM fittings and Speedfit barrier pipe are kitemarked to BS7291 Part 1 and 3, Class S. (Licence No. KM39767). Pipe in ceilings and roof voids should be clipped every metre and should not be fitted any closer than 60mm from the end of the fitting. Pipe should be adequately supported by pipe clips to prevent undue stress (side load) on fittings. Can only be used with water or oil based paint, not cellulose based paints, paint thinners or strippers, solder flux or acid-based descalents or aggressive household cleaning products. Speedfit products, when used indoors, are not affected by sunlight. When used outdoors protect from ultra violet light by lagging or painting. It is recommended that all installations are checked prior to use to determine that a seal has been made.

ManoMano

Quickly and securely connects three pipes of equal size JG Speedfit equal tee push-fit fitting for the connection of three equal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene

Plumbing Superstore

The John Guest Speedfit equal tee is a push-fit plastic fitting that easily connects copper and plastic pipes. It is demountable and straightforward to use, ideal for hot, cold, and central heating systems. Resistant to chemicals, this equal tee suits potable liquids and pure water applications. Approved by the WRAS and BSI, it meets all necessary standards. Available in 10mm to 28mm sizes, it offers great versatility. The push-fit connection is fully demountable. It works well with hot and cold water systems, and central heating setups. The design ensures a grip and seal connection, is lead-free, corrosion-free, and does not accumulate scale.. John Guest Speedfit Push-Fit Plastic Equal Tee - 15mm