John Guest Speedfit White Plastic Angle Service Valve with Tap Connector 15mm x 1/2 inch Acetal

The bent plastic service valve allows you to stop the flow of water to a tap via a 1/4 turn of a screw on the valve. A 90 degree bent nut can be tightened onto a side entry tap.Simply push the valve fully onto the pipe and connect the tap connection to the thread. If the need arises to demount the connection, push the collet towards the body of the fitting and pull the pipe to release. Installation can be reduced by around 40% against traditional fixing methods.Features & Benefits: John Guest Speedfit White Plastic Angle Service Valve with Tap Connector - 15mm x 1/2 inch, Simple to install, Push-fit and demountable connections, Lead-free, Non-toxic, No scale build-up, Corrosion-free, Manufactured in the UK, Made to the highest quality, BSI and WRAS approvedThe strictest control is maintained by virtue of the fact that design and manufacture are carried out in modern purpose-built manufacturing centres in west London and at Maidenhead in Berkshire. Maintaining control over the whole process from initial tool design and tool making through to final assembly and testing ensures that this angled plastic service valve tap connector is produced to the highest quality. John Guest Speedfit believe that it is this commitment to quality that has led to it receiving awards from many of the world™s leading testing and approvals organisations.Please note: , This angled plastic service valve tap connector is not suitable for central heating systems.. John Guest Speedfit White Plastic Angle Service Valve with Tap Connector - 15mm x 1/2 inch Acetal

JG Speedfit angle service valve with tap connector for connecting fixtures to pipework. The valve enables the flow of water to a fixture to be isolated in the event of an emergency or for maintenance work using a tamperproof ¼ turn screwdriver slot. Simply push the valve fully onto the pipe and use the 90o bent nut to hand-tighten on to a side entry tap, toilet or male thread. To demount the push-fit connection end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit angle service valve with tap connector is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Push-fit service valve and hand-tighten tap connector 1/4 turn isolation screwdriver slot Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene