Jumper Cables Adapter Compatible with Ryobi 18V Battery, 12AWG 6FT/1.8M Portable Battery Jump Starter Automotive Booster Power for Car Starting Tool

Jumper Cable Clamps: - The jump starter cable is designed to be compatible with Ryobi batteries. When your car battery drains and leaves you stranded, It may be difficult to find someone to help jump-start your car. Our jumper cables offer you a new solution, Only need to move the power adapter into the groove, Then push the converter and ensure it has locked the battery Specifications - Wire: 12-AWG, The applicable range is 12-24v voltage. Perfect for most motorcycles, Cars, and SUVs, Capable of jumpstarting up to 5.0L gasoline and 3.0L diesel engines Instructions - 1. Connect the red battery clip of the jumper cable to the positive pole (+) of the vehicle and the black to the negative pole (-); 2. Insert the battery into the adapter and ensure it is securely locked; 3. Start the car and disassemble the Lower clamp. Pay attention please NOT reverse the operation sequence of the jump starter Easy Operation - Insert The Fully Charged Battery Into The Adapter. Connect The Red Clamp To The Positive Terminal Of The Car Battery And The Black To The Negative Terminal. Start Your Vehicle And Disconnect The Cables Clamps Within 30 Seconds Note - Check your device power before using, The battery charge should ideally be above 50%. 1. If the first ignition fails, wait a few minutes before attempting to ignite again. 2. If the ignition is successful, Remove the product from the vehicle within 30 seconds, or it may cause security incidents