Junchamp 75x20x10mm Grinding Wheel Adapter and Stone for Drill, Change Electric Drill into Machine Metal Grinding, Polishing, Deburring（White）

【Specifications】Grinding wheel for drill diameter 75mm, center hole: 3/8 inch(10mm), height about 20mm, Drill Arbor Adapter size: Shaft diameter 3/8inch 【Durable Material】The grinding wheel is made of high-purity white corundum and aluminum oxide. Good cutting performance, low heat generation, sharp abrasive grains, and good thermal conductivity 【Easy to Use】Our small grinding wheel for drill is designed to be easy to install and compatible with most standard bench grinders with flexible shafts. Install it on your grinder and you can start polishing or grinding immediately. Before grinding, check whether the screws are tightened and the drill chuck is tightened to ensure power safety. When grinding, soak the grinding wheel in water for about 3 minutes to make the metal more delicate. And the drill bit should rotate clockwise at a low speed. Its compact size and lightweight design make it easy to carry and operate 【Versatile Application】The grinding stone for drill is installed on a small bench grinder, grinder or hand drill for grinding, rust removal, polishing and cleaning various tools and items. For example, grinding cast iron, brass, rubber, plastic, wood, ore, etc 【Note】Since the grinding wheel is relatively brittle, it is inevitable that the edge of the grinding wheel will be bumped during express transportation, which may cause slight damage, but it will not affect the use. When using, pay attention to wearing goggles and dust masks to prevent the fine objects generated during polishing from entering your eyes and respiratory tract