Junchamp Bullnose Grinding Wheel Porcelain Tool, 73mmx10mmx20mm Brazed Concave Abrasive For Marble, Granite, Ceramic, Artificial Stone

Bullnose Grinding Wheel for 10mm Thick Materials: Designed to form a rounded bullnose edge on 10mm thick porcelain tiles, porcelain paving slabs, ceramic, marble, granite, quartz and artificial stone. Check the actual thickness of your tile or stone before ordering 73mm Porcelain Bullnose Tool with 20mm Bore: This diamond profile wheel features a 73mm outer diameter and a 20mm centre bore for suitable angle grinder mounting systems. Check the spindle, backing flange, locking nut and guard clearance before use. This wheel is not designed for standard 22.23mm bore fittings Brazed Diamond Tile Edging Tool: The brazed diamond abrasive surface and concave profile are designed for controlled material removal and rounded edge shaping. Suitable for porcelain tile edge profiling, bullnose shaping and stone edge finishing rather than straight cutting Wet or Dry Edge Profiling: Suitable for both wet and dry tile and stone edge shaping. Make several light passes, keep the diamond profile wheel moving and avoid excessive pressure. For wet use, ensure the power tool and working setup are approved for wet operation For Porcelain Paving, Tiles and Stone Edging: Suitable for porcelain paving slabs, ceramic tiles, marble, granite, quartz, worktops and artificial stone. Secure the workpiece, test on an offcut first, follow the grinder and accessory speed instructions, and wear suitable eye, hearing and respiratory protection